Brother XL-3510i, XL-2610i, XL-3520i, XL-2620i operation manual Important Safety Instructions

Page 2

IMPORTANT SAFETY INSTRUCTIONS

When using this machine, basic safety precautions should always be taken, including the following:

Read all instructions before using.

DANGER - To reduce the risk of electric shock:

1.The machine should never be left unattended while plugged in. Always unplug the machine from the electrical outlet immediately after using and before cleaning.

2.Always unplug the machine before you change the light bulb. Replace the bulb with same type rated 15 watts.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons:

1.Do not allow this machine to be used as a toy. Close attention is necessary when the machine is used by or near children.

2.Use this machine only for its intended use as described in this manual. Use only accessories recommended by the manufacturer as contained in this manual.

3.Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment.

4.Never operate the machine with any air openings blocked. Keep ventilation openings of the machine and foot control free from the accumulation of lint, dust, and loose cloth.

5.Never drop or insert any object into any opening.

6.Do not use outdoors.

7.Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

8.To disconnect, turn the machine switch to the symbol “{” position which represents off, then remove plug from outlet.

9.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10.Keep fingers away from all moving parts. Special care is required around the machine needle.

11.Always use the proper needle plate. The wrong plate can cause the needle to break.

12.Do not use bent needles.

13.Do not pull or push fabric while stitching. It may deflect the needle, causing it to break.

14.Switch the machine to the symbol “{” position to turn it off when making any adjustments in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, and the like.

15.Always unplug the machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual.

16.This sewing machine is not intended for use by young children or infirm persons without supervision. (For Australia and New Zealand only)

17.Young children should be supervised to ensure that they do not play with this machine.

SAVE THESE INSTRUCTIONS

This machine is intended for household use.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Appendix Important Safety Instructions For Users in the UK, EIRE, Malta and Cyprus only UNPACKING/REPACKING Instructions Please Read These Instructions Before YOU USE the MachineContents Appendix Knowing Your Sewing Machine Main PartsAccessories Optional AccessoriesUsing Your Sewing Machine Connecting PlugsChecking the Needle Main Power and Sewing Light SwitchFoot Controller Replacing the NeedleChanging the Presser Foot Touches the stopper, and securely tighten1Slideopen theit. flat bed attachment to the left to Using a Free-arm StyleFlat Bed Attachment Slide the flat bed attachment to the left to release itStitches ControlsPattern Selection Dial Instruction Patterns and Stitch NamesPattern Recommended ManualPattern Stitch Name Recommended Stitch Length Dial Fagoting StitchReverse Sewing Lever Stretch StitchingStitch Width Dial Stitches Selecting a Stretch StitchThreading the Machine Winding the BobbinWound evenly Wound poorly Lower Threading This feature is only available on certain models Lower Threading for models equipped with a quick-set bobbinFollow steps 1 and 2 from Lower Threading 4Feed the upper thread as previously shown Raise the presser foot using the presser foot leverUpper Threading Putneedle.the thread behind the guide above Hook Thread Drawing up the Lower Thread Sewing with a Twin NeedleThread Tension Size FABRIC, THREAD, and Needle CombinationsFabric Type Thread Size of Needle MediumPattern Please Read Before SewingStraight Stitching Fixed 16-0Zigzag Stitch Zigzag StitchingWidth Zigzag StitchStitch Blind Hem StitchingShell Tuck Stitching 3/16Elastic Stitching 4Sew at a slow speedOveredge Stitching Double Action StitchingHeirloom Stitching Stitch Stitch Name PatternFeather Stitching Triple Zigzag Stretch StitchingDecorative Stitching Width Foot Making a Buttonhole 1-Step Automatic ButtonholeStitch Pattern Making a ButtonholeAdjusting Buttonholes Sewing Buttons Turnfoot. off the machine and raise the presser Zipper InsertionCenter Other GatheringDarning AnyStitch Width AppliquésMonogramming Embroidering 4Remove the basting, if necessaryKeep fingers away from moving parts, especially needles Optional Accessories Using the Walking FootStitch Plate Using the Quilting FootWidth Other Fabric slowly Using the 1/4-inch Quilting FootAchieving an Accurate Seam Allowance 16-3/32Changing the Light Bulb MaintenanceCleaning Put the light cover back on and fasten the screwInstall the needle plate cover Troubleshooting Symptom Possible cause How to put it right ReferenceThread ten LowerOr breaks Fabric isThere is a high Stitches areSkipped Pitched noise While sewingIndex NumericsEnglish

XL-3510i, XL-2610i, XL-2620i, XL-3520i specifications

Brother XL-2620i, XL-3520i, XL-3510i, and XL-2610i are four sewing machines that stand out for their blend of user-friendly features and advanced technology, making them suitable for both beginners and more experienced sewists. These models are part of Brother's XL series, which is known for reliability and innovation.

The Brother XL-2620i is designed for versatility, featuring 30 built-in stitches, including utility, decorative, and quilting stitches. This wide range of options allows users to tackle various sewing projects with ease. The machine’s automatic needle threader simplifies the threading process, while the drop-in bobbin system ensures convenience and efficiency. An adjustable stitch width and length enables personalized stitch formation, providing flexibility for different fabric types.

The XL-3520i, on the other hand, takes creativity a step further with its 35 built-in stitches, including advanced functions like zigzag and blind hem stitches. Designed for those who wish to expand their sewing capabilities, it includes a one-step buttonhole feature, making it easy to create buttonholes in a streamlined process. The machine also boasts a larger work area, accommodating bigger projects.

The XL-3510i shares many features with the XL-3520i but focuses on simplicity. With 10 essential built-in stitches, it's ideal for straightforward sewing tasks. Its lightweight design enhances portability, making it perfect for sewing on the go. The intuitive control layout ensures a seamless user experience, allowing novices to grasp sewing basics quickly.

Lastly, the XL-2610i is particularly favored for its ease of use. This model contains 27 stitch options, providing ample choices for diverse projects while maintaining an uncomplicated user interface. The machine comes equipped with a free arm for sewing cuffs and sleeves, enhancing its practicality for various garment constructions.

All four models feature Brother's innovative jamming resistance technology, ensuring smooth fabric feed and less downtime. They also incorporate various foot options and accessories, catering to specific sewing requirements. With robust build quality and reliability, the Brother XL series shines in home sewing and crafting, bridging the gap between function and creativity. Each machine serves as a valuable tool for achieving impressive sewing projects, allowing users to express their artistic vision with confidence.
Top Page Image Contents