Brother XL-2620i, XL-2610i, XL-3520i, XL-3510i Knowing Your Sewing Machine, Main Parts

Page 7

1KNOWING YOUR SEWING MACHINE

THE MAIN PARTS

1

1Bobbin winder (Page 16)

This winds the thread onto the bobbin for use as the lower thread.

2Spool pin (Page 16, 21)

This holds the spool of thread.

3Thread guide (Page 16, 21)

This is used when winding the thread onto the bobbin and then threading the machine.

4Thread take-up lever (Page 21)

5Hole for extra spool pin (Page 25)

This holds a second spool of thread for sewing with the twin needle.

6Stitch width dial (Page 15) This controls the stitch width.

7Upper tension-control dial (Page 25)

This controls the tension of the upper thread.

8Thread cutter (Page 28)

Pass the threads through the thread cutter to cut them.

9Needle threader (Page 22)

(This is only available on certain models.)

0Quick-set bobbin (Page 19)

(This is only available on certain models.)

AFlat bed attachment with accessory compartment (Page 10)

BPresser foot (Page 9)

CReverse sewing lever (Page 15)

You can push this to stitch in the reverse direction.

DPattern selection dial (Page 11)

You can turn this in either direction to choose the stitch you want.

EStitch length dial (Page 14) This controls the stitch length.

FButtonhole fine-adjustment screw (Page 36)

GHandwheel

Used to manually raise and lower the needle.

HMain power and sewing light switch (Page 8)

You can turn the main power and sewing light switch on and off.

IFoot controller jack / socket (Page 7)

Plug in the foot controller plug and connect the machine to the power supply.

JPresser foot lever (Page 21)

Used to raise and lower the presser foot.

KButtonhole lever (1-Step automatic buttonhole) (Page 34) Lower the buttonhole lever when sewing buttonholes.

LFoot controller (Page 8)

You can use this to control the sewing speed, and to start and stop sewing.

Parts Code for Zigzag Presser Foot: XC4901-051

Foot Controller: Model KD-1902

Parts Code: XC7359-022 (110/120V Area)

XC7438-222 (220/240V Area)

XC7456-222 (U.K.)

XC7455-022 (Australia, New Zealand)

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Appendix Important Safety Instructions For Users in the UK, EIRE, Malta and Cyprus only Please Read These Instructions Before YOU USE the Machine UNPACKING/REPACKING InstructionsContents Appendix Main Parts Knowing Your Sewing MachineOptional Accessories AccessoriesConnecting Plugs Using Your Sewing MachineReplacing the Needle Main Power and Sewing Light SwitchFoot Controller Checking the NeedleTouches the stopper, and securely tighten Changing the Presser FootSlide the flat bed attachment to the left to release it Using a Free-arm StyleFlat Bed Attachment 1Slideopen theit. flat bed attachment to the left toPattern Selection Dial ControlsStitches Manual Patterns and Stitch NamesPattern Recommended InstructionPattern Stitch Name Recommended Fagoting Stitch Stitch Length DialStitches Selecting a Stretch Stitch Stretch StitchingStitch Width Dial Reverse Sewing LeverWinding the Bobbin Threading the MachineWound evenly Wound poorly Lower Threading Lower Threading for models equipped with a quick-set bobbin This feature is only available on certain modelsFollow steps 1 and 2 from Lower Threading Upper Threading Raise the presser foot using the presser foot lever4Feed the upper thread as previously shown Putneedle.the thread behind the guide above Hook Thread Sewing with a Twin Needle Drawing up the Lower ThreadThread Tension Medium FABRIC, THREAD, and Needle CombinationsFabric Type Thread Size of Needle SizeFixed 16-0 Please Read Before SewingStraight Stitching PatternZigzag Stitch Zigzag StitchingWidth Zigzag Stitch3/16 Blind Hem StitchingShell Tuck Stitching Stitch4Sew at a slow speed Elastic StitchingStitch Stitch Name Pattern Double Action StitchingHeirloom Stitching Overedge StitchingTriple Zigzag Stretch Stitching Feather StitchingDecorative Stitching Making a Buttonhole Making a Buttonhole 1-Step Automatic ButtonholeStitch Pattern Width FootAdjusting Buttonholes Sewing Buttons Center Zipper InsertionTurnfoot. off the machine and raise the presser Any GatheringDarning Other4Remove the basting, if necessary AppliquésMonogramming Embroidering Stitch WidthKeep fingers away from moving parts, especially needles Using the Walking Foot Optional AccessoriesWidth Other Using the Quilting FootStitch Plate 16-3/32 Using the 1/4-inch Quilting FootAchieving an Accurate Seam Allowance Fabric slowlyPut the light cover back on and fasten the screw MaintenanceCleaning Changing the Light BulbInstall the needle plate cover Symptom Possible cause How to put it right Reference TroubleshootingFabric is LowerOr breaks Thread tenPitched noise While sewing Stitches areSkipped There is a highNumerics IndexEnglish

XL-3510i, XL-2610i, XL-2620i, XL-3520i specifications

Brother XL-2620i, XL-3520i, XL-3510i, and XL-2610i are four sewing machines that stand out for their blend of user-friendly features and advanced technology, making them suitable for both beginners and more experienced sewists. These models are part of Brother's XL series, which is known for reliability and innovation.

The Brother XL-2620i is designed for versatility, featuring 30 built-in stitches, including utility, decorative, and quilting stitches. This wide range of options allows users to tackle various sewing projects with ease. The machine’s automatic needle threader simplifies the threading process, while the drop-in bobbin system ensures convenience and efficiency. An adjustable stitch width and length enables personalized stitch formation, providing flexibility for different fabric types.

The XL-3520i, on the other hand, takes creativity a step further with its 35 built-in stitches, including advanced functions like zigzag and blind hem stitches. Designed for those who wish to expand their sewing capabilities, it includes a one-step buttonhole feature, making it easy to create buttonholes in a streamlined process. The machine also boasts a larger work area, accommodating bigger projects.

The XL-3510i shares many features with the XL-3520i but focuses on simplicity. With 10 essential built-in stitches, it's ideal for straightforward sewing tasks. Its lightweight design enhances portability, making it perfect for sewing on the go. The intuitive control layout ensures a seamless user experience, allowing novices to grasp sewing basics quickly.

Lastly, the XL-2610i is particularly favored for its ease of use. This model contains 27 stitch options, providing ample choices for diverse projects while maintaining an uncomplicated user interface. The machine comes equipped with a free arm for sewing cuffs and sleeves, enhancing its practicality for various garment constructions.

All four models feature Brother's innovative jamming resistance technology, ensuring smooth fabric feed and less downtime. They also incorporate various foot options and accessories, catering to specific sewing requirements. With robust build quality and reliability, the Brother XL series shines in home sewing and crafting, bridging the gap between function and creativity. Each machine serves as a valuable tool for achieving impressive sewing projects, allowing users to express their artistic vision with confidence.
Top Page Image Contents