Brother Brother USB Writer, PE-DESIGN manual Importing image data from the Clipboard

Page 25

Automatically Converting an Image to an Embroidery Pattern

1.Check that the scanner or other TWAIN device is correctly connected to your computer.

2.Click Image, then Select TWAIN device.

→A Select Source dialog box similar to the one shown below appears.

3.From the Sources list, click the desired device to select it.

a Note:

If no TWAIN device is installed, there will be no names displayed in the Sources list. First, install the driver software for the TWAIN device that you want to use.

4.Click Select to choose the selected device and to close the dialog box.

b Memo:

To quit the operation and close the dialog box, click Cancel.

5.Click Image, then Input, then from TWAIN device.

→The driver interface for the device selected in the Select Source dialog box appears.

6.Specify the necessary settings for importing an image, and then import the image.

a Note:

For information on using the driver interface, refer to the help manual for that interface, or contact the manufacturer of the interface.

→When the image transfer between the scanner (or other device) and the driver is completed, the imported image will be pasted into the Design Page at its original size.

b Memo:

•If the image currently displayed in the Design Page has not yet been saved, you will be asked whether you want to save it.

•To display, hide, or display a faded copy of the image that remains in the work area, click Image, then Display Image, and then click the desired display setting.

•To hide the original image, click Off.

a Note:

Only one image can be added to the work area. If you try to display a different image, it will replace the previous one.

Importing image data from the Clipboard

Image data can be imported into the Design Page from the Clipboard. This allows you to import an image without saving it first.

1.Click Image, then Input, then from Clipboard.

a Note:

This can only be done when there is image data on the Clipboard.

→The image is displayed in the Design Page.

b Memo:

•The image is displayed with a resolution of 100 dpi for both the height and width.

•If the image currently displayed in the Design Page has not yet been saved, you will be asked whether you want to save it.

21

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Page Radio Interference Other than USA and Canada Important Information RegulationsFor repairs or adjustments For a longer service lifeFor designing beautiful embroidery patterns For safe operationTable of Contents Before Use Package ContentsWhat you can do with this software IntroductionPrincipal Parts Optional SupplyPlease Read Before Installation InstallationSystem Requirements For Windows XP or 2000 users Installing the SoftwareClick the Start button Click Run Windows Vista users only Click Run setup.exeClick Continue Before Use Before Use Technical Support UninstallationOnline Registration Online registration may not be available in some areasTutorial Understanding the Window and Using ToolsStart up PE-DESIGN Lite Entering textEnter the text Value indicates the height of the characters Adjust the text size and position Importing image data Adjusting the text layoutImport the image Automatically converting the image to an embroidery pattern Adjust the image size and positionStart Auto Punch Convert the image to an embroidery pattern Specifying the sewing color and directionChange the region color → The Region Thread Color dialog box appears→ The Sewing Attribute Setting dialog box appears Click Sew, then Sewing Attribute Setting, orChange the sewing direction Displaying a preview of the embroidery Changing the sewing orderClick Sew, then Sewing Order / Color, or → The Sewing Order / Color dialog box appearsClick Display, then Realistic Preview, or Saving the embroidery designClick File, then Save, or click on the toolbar Insert an original card into the USB card writer module Transferring the design to an original cardTransfer the embroidery design Quit PE-DESIGN LiteImporting Image Data To quit the operation, click CancelImporting image data Importing image data from a scannerClick Image, then Select Twain device Importing image data from the ClipboardClick Image, then Input, then from Twain device Changing the display of the background image Changing the Image SettingsChanging the size and position of the image Original View tab Max. Number of Colors Sets the number of colors usedColors that are crossed out are set to not be sewn Opening/Importing Embroidery Designs Arranging Embroidery DesignsCreating a new embroidery design Opening a PE-DESIGN Lite fileArranging Embroidery Designs Click or File, then Import from File Importing embroidery design filesCtrl key and dragging them to the PE Design Lite window Specifying the Design Page Size and Color Saving as a file Saving the Image DataOutputting to the Clipboard Click Image, then Output, then to ClipboardSelecting patterns Editing Embroidery DesignsMoving patterns Selecting patterns in the created orderFlipping patterns horizontally or vertically Scaling patternsRotating patterns Selecting patterns individually Entering Text Adding TextFont Selecting text attributesEditing entered text Text Size selector appears Sewing Attributes bar when onText Size Entering Text onSpecifying text arrangement Curving Applying Sewing Attributes to Text and Regions Setting the thread color and sew typeColor Text attributesSew type Special colorsToolbar button Specifying sewing attributesSatin stitch Region sewing attributesFill stitch Zooming Selecting a pattern Checking and editing the sewing order/ colorTo select multiple patterns, hold down Combining patterns of the same color Editing the sewing orderEditing the color To zoom in or out, click Displaying a preview of the embroideryBox, click Desired area of the embroidery designChanging realistic preview settings Checking embroidery design information Saving Saving and PrintingOverwriting Saving with a new nameOverwriting on page 49 and Saving with a new name on Writing multiple embroidery files to an original cardClick File, then Write to Card, then Other PES files Card and appears Click File, then Print Setup Specifying print settingsPrinting Adding comments to saved .pes filesStitch image Checking the print imageClick File, then Print Preview Printing Changing the grid settings Changing Software SettingsClick Display, then Grid Setup Changing the measurement unitsSewing Direction Tips and TechniquesSewing Order Sewing Wide AreasList of Tool Box Buttons Menus/ToolsList of Menus File menuEdit menu Menus/ToolsCtrl + H Encapsulated PostScript .eps, Kodak Image menuJ2k Sew menu Text menuDisplay menu Help menu Option menuReader or Adobe Acrobat Reader Internet connectionTroubleshooting Index Index Page Product Agreement Read the following before opening the CD-ROM packageEnglish XE2656-001

Brother USB Writer, PE-DESIGN specifications

Brother PE-DESIGN is a powerful software suite that serves as an essential tool for embroidery enthusiasts and professionals alike. Designed specifically for Brother embroidery machines, this software offers a range of features that enable users to create, edit, and customize embroidery designs with ease. The software is compatible with various Brother embroidery models, making it a versatile solution for many users.

One of the standout features of Brother PE-DESIGN is its user-friendly interface, which allows beginners to navigate the software without feeling overwhelmed. The software provides a wide array of editing tools, including the ability to resize, rotate, and mirror designs. Users can also combine multiple designs into a single project, making it easy to create unique and intricate embroidery patterns.

In addition to its editing capabilities, Brother PE-DESIGN boasts advanced digitizing features that enable users to convert images into embroidery files. This allows for greater creative freedom as users can transform their own artwork or design ideas into beautiful embroidered pieces. The software supports various file formats, ensuring compatibility with a wide range of embroidery machines.

Another notable feature of Brother PE-DESIGN is its extensive library of built-in designs and fonts. With thousands of pre-installed embroidery designs, users can quickly find inspiration for their next project. Moreover, the software also allows users to import custom designs, further expanding their creative possibilities.

The Brother USB Writer is an add-on tool that enhances the functionality of the PE-DESIGN software. This device allows users to transfer their embroidery designs directly from their computer to their Brother embroidery machine via USB. The USB Writer simplifies the process of uploading files, ensuring that users can start their embroidery projects quickly and efficiently.

In terms of technology, Brother PE-DESIGN utilizes cutting-edge algorithms that ensure high-quality digitization and accurate stitch placement. This level of precision is essential for creating intricate designs that can withstand the rigors of embroidery. Additionally, the software is regularly updated to incorporate new features and improvements, keeping it on the cutting edge of design technology.

Overall, Brother PE-DESIGN and the Brother USB Writer represent a complete solution for embroidery enthusiasts. With their robust features, user-friendly interface, and impressive digitizing capabilities, these tools empower users to bring their creative visions to life. Whether you are a beginner or an experienced embroiderer, Brother PE-DESIGN enhances your embroidery journey with its comprehensive tools and functionalities.
Top Page Image Contents