Brother Brother USB Writer, PE-DESIGN manual Max. Number of Colors Sets the number of colors used

Page 27

Automatically Converting an Image to an Embroidery Pattern

Automatically Converting an Image to an Embroidery Pattern (Auto Punch)

The Auto Punch gives step-by-step instructions for converting an image into an embroidery pattern.

1.If no image is displayed in the Design Page, use one of the commands on the Input sub- menu of the Image menu to display the image that you want to convert to an embroidery pattern.

2.Click Image, then Modify, and then re-size and re-position the image for creating the embroidery pattern.

3.Click on the Tool Box.

→After the image has been analyzed by the software, an Auto Punch dialog box similar to the one shown below appears.

a Note:

The dialog box will not appear if no image is displayed in the Design Page. Instead, a dialog box appears, allowing you to open an image file.

4.Select the desired settings.

To display the resulting analyzed image, click the Result View tab. The embroidery pattern will be created with this image.

To adjust the zoom ratio that the image is

displayed in, move the slider between

and .

To display the outline extracted from the analyzed image, select the Show Outline check box.

Use the following sliders to specify the settings for analyzing the image.

Noise reduction: Sets the level of noise (distortions) that is removed from the image. Segmentation sensitivity: Sets the sensitivity for the image analysis.

Max. Number of Colors: Sets the number of colors used.

From the Thread Chart selector, select the desired thread color chart. The most appropriate thread colors from the selected thread chart are selected.

To display the original image, click the

Original View tab.

b Memo:

•After changing the settings, click Retry to display the image with the new settings applied. If Retry is not clicked, the new settings are not applied.

•To quit the operation and close the dialog box, click Cancel.

5.On the Result View tab, click the areas of the image to select whether or not they are to be sewn.

b Memo:

Areas not set to be sewn are shown filled with a crosshatch pattern.

This area

will not be sewn.

23

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Page Radio Interference Other than USA and Canada Important Information RegulationsFor safe operation For a longer service lifeFor repairs or adjustments For designing beautiful embroidery patternsTable of Contents Introduction Package ContentsBefore Use What you can do with this softwarePrincipal Parts Optional SupplyInstallation Please Read Before InstallationSystem Requirements Installing the Software For Windows XP or 2000 usersClick the Start button Click Run Click Run setup.exe Windows Vista users onlyClick Continue Before Use Before Use Online registration may not be available in some areas UninstallationTechnical Support Online RegistrationTutorial Understanding the Window and Using ToolsEntering text Start up PE-DESIGN LiteEnter the text Value indicates the height of the characters Adjust the text size and position Adjusting the text layout Importing image dataImport the image Adjust the image size and position Automatically converting the image to an embroidery patternStart Auto Punch → The Region Thread Color dialog box appears Specifying the sewing color and directionConvert the image to an embroidery pattern Change the region colorClick Sew, then Sewing Attribute Setting, or → The Sewing Attribute Setting dialog box appearsChange the sewing direction → The Sewing Order / Color dialog box appears Changing the sewing orderDisplaying a preview of the embroidery Click Sew, then Sewing Order / Color, orSaving the embroidery design Click Display, then Realistic Preview, orClick File, then Save, or click on the toolbar Quit PE-DESIGN Lite Transferring the design to an original cardInsert an original card into the USB card writer module Transfer the embroidery designImporting image data from a scanner To quit the operation, click CancelImporting Image Data Importing image dataImporting image data from the Clipboard Click Image, then Select Twain deviceClick Image, then Input, then from Twain device Changing the Image Settings Changing the display of the background imageChanging the size and position of the image Original View tab Max. Number of Colors Sets the number of colors usedColors that are crossed out are set to not be sewn Opening a PE-DESIGN Lite file Arranging Embroidery DesignsOpening/Importing Embroidery Designs Creating a new embroidery designArranging Embroidery Designs Click or File, then Import from File Importing embroidery design filesCtrl key and dragging them to the PE Design Lite window Specifying the Design Page Size and Color Click Image, then Output, then to Clipboard Saving the Image DataSaving as a file Outputting to the ClipboardSelecting patterns in the created order Editing Embroidery DesignsSelecting patterns Moving patternsScaling patterns Flipping patterns horizontally or verticallyRotating patterns Selecting patterns individually Entering Text Adding TextFont Selecting text attributesEntering Text on Text Size selector appears Sewing Attributes bar when onEditing entered text Text SizeSpecifying text arrangement Curving Text attributes Setting the thread color and sew typeApplying Sewing Attributes to Text and Regions ColorSew type Special colorsToolbar button Specifying sewing attributesRegion sewing attributes Satin stitchFill stitch Zooming Checking and editing the sewing order/ color Selecting a patternTo select multiple patterns, hold down Editing the sewing order Combining patterns of the same colorEditing the color Desired area of the embroidery design Displaying a preview of the embroideryTo zoom in or out, click Box, clickChanging realistic preview settings Checking embroidery design information Saving with a new name Saving and PrintingSaving OverwritingWriting multiple embroidery files to an original card Overwriting on page 49 and Saving with a new name onClick File, then Write to Card, then Other PES files Card and appears Adding comments to saved .pes files Specifying print settingsClick File, then Print Setup PrintingChecking the print image Stitch imageClick File, then Print Preview Printing Changing the measurement units Changing Software SettingsChanging the grid settings Click Display, then Grid SetupSewing Wide Areas Tips and TechniquesSewing Direction Sewing OrderFile menu Menus/ToolsList of Tool Box Buttons List of MenusEdit menu Menus/ToolsCtrl + H Image menu Encapsulated PostScript .eps, KodakJ2k Text menu Sew menuDisplay menu Internet connection Option menuHelp menu Reader or Adobe Acrobat ReaderTroubleshooting Index Index Page Product Agreement Read the following before opening the CD-ROM packageEnglish XE2656-001

Brother USB Writer, PE-DESIGN specifications

Brother PE-DESIGN is a powerful software suite that serves as an essential tool for embroidery enthusiasts and professionals alike. Designed specifically for Brother embroidery machines, this software offers a range of features that enable users to create, edit, and customize embroidery designs with ease. The software is compatible with various Brother embroidery models, making it a versatile solution for many users.

One of the standout features of Brother PE-DESIGN is its user-friendly interface, which allows beginners to navigate the software without feeling overwhelmed. The software provides a wide array of editing tools, including the ability to resize, rotate, and mirror designs. Users can also combine multiple designs into a single project, making it easy to create unique and intricate embroidery patterns.

In addition to its editing capabilities, Brother PE-DESIGN boasts advanced digitizing features that enable users to convert images into embroidery files. This allows for greater creative freedom as users can transform their own artwork or design ideas into beautiful embroidered pieces. The software supports various file formats, ensuring compatibility with a wide range of embroidery machines.

Another notable feature of Brother PE-DESIGN is its extensive library of built-in designs and fonts. With thousands of pre-installed embroidery designs, users can quickly find inspiration for their next project. Moreover, the software also allows users to import custom designs, further expanding their creative possibilities.

The Brother USB Writer is an add-on tool that enhances the functionality of the PE-DESIGN software. This device allows users to transfer their embroidery designs directly from their computer to their Brother embroidery machine via USB. The USB Writer simplifies the process of uploading files, ensuring that users can start their embroidery projects quickly and efficiently.

In terms of technology, Brother PE-DESIGN utilizes cutting-edge algorithms that ensure high-quality digitization and accurate stitch placement. This level of precision is essential for creating intricate designs that can withstand the rigors of embroidery. Additionally, the software is regularly updated to incorporate new features and improvements, keeping it on the cutting edge of design technology.

Overall, Brother PE-DESIGN and the Brother USB Writer represent a complete solution for embroidery enthusiasts. With their robust features, user-friendly interface, and impressive digitizing capabilities, these tools empower users to bring their creative visions to life. Whether you are a beginner or an experienced embroiderer, Brother PE-DESIGN enhances your embroidery journey with its comprehensive tools and functionalities.
Top Page Image Contents