Introduction, General instructions, Hcc

Introduction

Congratulations on your choice of the Harman Kardon HK 970 Integrated Amplifier.

In order to obtain the best performance from this integrated amplifier, please be sure to read this owner's manual and use your integrated amplifier only in accordance with its instructions.

The special features of this unit include:

HCC

(High Instantaneous Current Capability) The amplifier sections react rapidly to musical transients, providing the instantaneous current necessary to precisely drive and control nearly any loudspeaker system.

Ultrawide Bandwidth

The bandwidth of this unit is exceptionally wide and is independent of negative feedback. This improves transient accuracy and phase linearity.

Low Negative Feedback

This unit has been designed to have low distor- tion and wide bandwidth without high negative feedback. This further improves its dynamic accuracy.

Discrete Component Circuitry

In order to achieve the above goals, all discrete electronic circuitry has been employed. No available integrated circuits could provide this high level of performance.

Sophisticated Electronic

Protection Circuitry

Harman Kardon's unique protection circuitry guards the amplifier from short circuit or damaged speakers and wires, without impairing sound quality by the use of current limiting or output relays.

General instructions

Always Use at 230V AC

This unit is designed for operation with 230VAC. Use only domestic AC outlets. Connecting the unit to an outlet supplying a higher voltage may create a fire hazard.

Handle the Power Cord Gently

Do not disconnect the plug from the AC outlet by pulling the cord; always pull the plug itself. Pulling the cord may damage it. If you do not intend to use your unit for any considerable length of time, turn the unit off completely by taking the power cord out of the AC wall outlet. Do not place furniture or other heavy objects on the cord, and try to avoid dropping heavy objects on it. Also do not tie a knot in the power cord. Not only may the cord be damaged, it can also cause a short circuit with a consequent fire hazard.

Place of installation

Place the unit on a firm and level surface. Avoid installing your unit under the following conditions:

■Moist or humid places.

■Places exposed to direct sunlight or close to heating equipment.

■Extremely cold locations.

■Places subject to excessive vibration or dust.

■Poorly ventilated places.

Provide sufficient ventilation, do not block ventilation openings.

Do not obstruct the ventilation slots on the top surface of the unit by placing objects on them. Otherwise, the temperature inside the unit may rise, possibly affecting its long-term reliability.

To ensure sufficient ventilation, the product should be placed in an open area with free air flow.

Do not place a CD player or other equipment on top of the amplifier.

Do not expose the amplifier to dripping or splashing. Do not place objects filled with liquids, such as vases, on or near the amplifier.

Moving the Unit

Before moving the unit, be sure to pull out the power cord from the AC outlet and disconnect the interconnection cords with other units.

Do Not Open the Cabinet

To prevent shock hazard, do not tamper with internal components for inspection or mainte- nance. Harman Kardon does not guarantee against performance degradation resulting from any modification. If water, a hairpin or wire acci- dentally enters the unit, immediately pull the plug from the AC outlet to prevent shock and consult an authorized Harman Kardon service station. If you use the unit under this condition, it may cause a fire shock hazard.

Cleaning

If the unit gets dirty, wipe it with a soft dry cloth. If necessary, wipe it with a soft cloth dampened with mild soapy water and then with a dry cloth. Never use benzene, thinner, alcohol or other volatile agents, and avoid spraying an insecticide near the unit.

Warning Signs

If you detect an abnormal smell or smoke, immediately turn the amplifier off and unplug the power cord. Contact your dealer or nearest Harman Kardon service center.

Packaging

Save all packing material. It is essential for shipping, should you move, or in the event the unit ever needs repair.

INTRODUCTION 3

HK 970 specifications

The Harman-Kardon HK 970 is a high-performance integrated amplifier that exemplifies the brand’s commitment to delivering exceptional sound quality and sophisticated design. As part of Harman Kardon’s renowned lineup, the HK 970 is engineered for audiophiles who seek a powerful and versatile audio solution to complement their home entertainment systems.

One of the standout features of the HK 970 is its robust amplification capabilities. It boasts a powerful output of 130 watts per channel into 8 ohms, ensuring that even the most demanding speakers are driven with ease. This amplifier utilizes a high-current design, which allows it to deliver clean and dynamic audio across a wide frequency range. Whether it’s nuanced vocals or thundering bass lines, the HK 970 ensures every detail is reproduced with clarity and precision.

The HK 970 is equipped with a variety of connectivity options, making it highly versatile for different audio setups. It features multiple line-level inputs, including phono, which is essential for vinyl enthusiasts wanting to connect turntables. Additionally, the amplifier includes both digital optical and coaxial inputs, allowing users to easily connect modern digital devices like televisions and CD players for high-quality sound playback.

Harman Kardon has incorporated advanced technologies into the HK 970 that enhance its audio performance. The amplifier employs a patented low-noise power supply design, which reduces distortion and enhances overall sound fidelity. Furthermore, it features Harman Kardon’s proprietary “GreenEdge” technology, which ensures energy efficiency without compromising performance. This not only helps in reducing the carbon footprint but also keeps operating temperatures low for prolonged use.

In terms of user experience, the HK 970 is thoughtfully designed with an intuitive front panel and a remote control that provides easy navigation through its settings. The sophisticated, understated aesthetics of the amplifier, combined with a high-quality build, make it a beautiful addition to any audio setup.

Overall, the Harman-Kardon HK 970 embodies excellence in design, performance, and flexibility. With its powerful amplification, a wide variety of inputs, and advanced sound technologies, it caters to both casual listeners and serious audiophiles alike.