Manual Advance Regeneration Check

This check verifies proper operation of the valve motor, brine tank fill, brine draw, regeneration flow rates, and other controller functions. Always make the initial checks first, and perform the manually initiated elec- tronic diagnostics.

NOTE: The display must show a steady time (not flash- ing). If an error code shows, first press the SELECT button to enter the diagnostic display.

1.Press the REGENERATION button and hold in for 3 seconds. "RECHARGE", "Serv" and "Fill" begin to flash in the display as the softener enters the fill cycle of regeneration.

2.When valve reaches "Fill" position, remove the brinewell cover and, using a flashlight, observe fill water entering the tank.

3.If water does not enter the tank, look for an obstructed nozzle, venturi, fill flow plug, brine tubing, or brine valve riser pipe.

4.After observing fill, press the REGENERATION button to move the softener into brining. A slow flow of water to the drain will begin. Verify brine draw from the brine tank by shining a flashlight into the brinewell and observing a noticeable drop in the liq- uid level.

5° If the softener does not draw brine:

•nozzle and/or venturi dirty

•nozzle and venturi not seated properly on gasket

•restricted drain (check drain fitting and hose)

•ineffective nozzle and venturi seal

•other inner valve problem (rotor seal, rotor & disc, wave washer, etc.)

Position Markers

(valve in service)

®O

® oO

Cam

Figure 41

NOTE: If water system pressure is low, an elevated drain hose may cause back pressure, stopping brine draw.

6.Again press REGENERATION to move the softener

into backwash. Look for a fast flow of water from the drain hose.

7.An obstructed flow indicates a plugged top distribu- tor, backwash flow plug or drain hose.

8.Press REGENERATION to move the softener into fast rinse. Again look for a fast drain flow. Allow the softener to rinse for a few minutes to flush out any brine that may remain in the resin tank from the brining cycle test.

9.To return the softener to service, press REGENERA- TION once more.

WIRING SCHEMATIC

Back of Controller (PWA)

AC INPUT	POS. / TURBINE	MOTOR
_	__ _±L_____B__L_		Valve

Transformer

Turbine	grn	&	NO	Position
Sensor		_O	NC	Switch	Figure 42
	brn

Questions? Call the I<enmore Water Line 1-800-426-9345 or visit www.kenmorewater.com

625.3835 specifications

The Kenmore 625.3835 is a highly versatile and efficient air purifier designed to improve indoor air quality in various environments, including homes and offices. Renowned for its advanced filtration technology, this model effectively captures a wide range of airborne pollutants, making it an excellent choice for individuals with allergies or respiratory issues.

One of the standout features of the Kenmore 625.3835 is its multi-stage filtration system. It incorporates a HEPA filter that is capable of trapping 99.97% of particles as small as 0.3 microns, including dust, pollen, pet dander, and smoke. This ensures that the air in your living space is not only cleaner but also healthier for occupants. In addition to the HEPA filter, the unit includes a pre-filter that captures larger particles, extending the life of the HEPA filter and optimizing overall performance.

The Kenmore 625.3835 also boasts activated carbon filtration technology, which is critical for odor removal. This feature is particularly beneficial in households with pets, cooking odors, or smoke. The activated carbon layer works by adsorbing volatile organic compounds (VOCs) and other unpleasant smells, thus enhancing the air purification process.

Another remarkable characteristic of this air purifier is its user-friendly design. The Kenmore 625.3835 is equipped with multiple fan speed settings, allowing you to adjust the airflow according to your needs. Whether you require quiet operation while sleeping or higher power during peak pollution times, this unit offers flexibility. Additionally, it includes a filter replacement indicator, making it easy to maintain the efficiency of the purifier by alerting users when it’s time for a filter change.

In terms of coverage, the Kenmore 625.3835 is suitable for medium to large rooms, effectively purifying air in spaces up to 300 square feet. This makes it an ideal choice for living rooms, bedrooms, and offices. The modern design and compact size allow it to fit seamlessly into various room styles.

Overall, the Kenmore 625.3835 is a powerful air purifier that stands out for its advanced filtration capabilities, effective odor removal, and user-friendly features. With its ability to significantly improve indoor air quality, it is an excellent investment for anyone looking to create a healthier living environment.