Kenmore 625.38888 Adding Salt to the Storage Tank, Water Softening Salt with Iron Remov

Page 9

SECTION1

WATER SOFTENER START UP

E. ADDING SALT TO THE STORAGE TANK

Brine (salt dissolved in water) is needed for each

and every regeneration. The water for making brine is metered into the salt storage tank by the softener.

You must keep salt in the tank, but because the wa-

ter softener is very efficient, it is not necessary to keep it full. In humid areas, it is best to fill the stor- age tank one quarter to one half full, and to refill it

more often. Salt bridging (see page 3-1) occurs more

often when conditions are humid.

Use NUGGET or PELLET water softener salt. DO NOT use rock salts, as they have dirt and sediments that will stop the softener from working.

When the salt cover is opened, the tank light turns

on and the display automatically goes to the Set Salt Level display.

Before adding salt, be sure the brinewell cover is in

place on the top of the brinewell. It is recommended

to set the salt monitor system, although it is not re-

quired for proper operation (see page 2-2).

POTASSIUM CHLORIDE, alternate to salt: The de- sign of this softener allows for the use of potassium chloride in place of salt (sodium chloride).

1)Place only one bag of KC1 in your softener at a time (the salt storage tank should contain no more

than 60 pounds of KC1 at any one time).

2)A softener using KC1 should not be placed in

areas with temperature fluctuations and high hu-

midity (KC1 will harden in these environments and may make the softener inoperable).

3)Check the brine tank and brinewell (black tube in

salt storage tank) monthly. If hardening is present,

pour small amounts of warm water on hardened areas until they loosen.

4)If you do use potassium chloride, see page 2-2 to set the timer for its use.

Note: The salt monitor system, page 2-2, is cali- brated to the density of nugget or pellet water soft- ener salt. The monitor will not work as accurately

with other types of salt including rock and solar.

WATER SOFTENING SALT WITH IRON REMOV-

ING ADDITIVES --Some salts have an additive to

help the softener handle iron in the water supply. These salts may be used if your water supply has a

high iron content, although it is recommended to use Sears Resin Bed Cleaner 42-34426, for periodic

treatments to keep your resin bed clean. This is available at your local Sears store.

_._ brinewell cover

salt

storage

tank _

brinewell

Sodium information: Water softeners using sodium

chloride for regeneration add sodium to the water.

Persons who are on sodium restricted diets should consider the added sodium as part of their overall

sodium intake. For example, if your water supply is 15 grains hard, you would have to drink 3 quarts of

softened water to consume 335 milligrams of so-

dium. That is equivalent to eating 2-1/2 slices of white bread.

Persons who are concerned about their drinking

water should consider a Kenmore Drinking Water System that will remove or reduce in excess of 90%

of the sodium and other drinking water contami- nants.

1-6

Problems, Questions? Call 1- 800- 426- 9345 Kenmore Water Line

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Save this Manual Owners ManualFull Three Year Electronics Warranty Full ONE Year Warranty on Water SoftenerFull TEN Year Warranty Against Leaks Sears Residential Water SoftenerWater Softener Start UP Care of Your Water SoftenerWater Softener Start UP Safety GuidesManual unless otherwise noted Check List of STEP-BY-STEP Guides to InstallTo are Unless OtherwiseSET Language Program the TimerSET Present Time of DAY DownSET Water Hardness Number If YOU Need Help Programming the TIMER, Call Toll FreeSelect Hardness NumberStorage tank Sanitize the Water SoftenerWater Softening Salt with Iron Remov Adding Salt to the Storage TankFaceplate Faceplate Timer Features ChangeLeci PPM LectMode Kenmores Ultra Cleansing Feature ServiceWater Flow Through Regeneration Water Flow Through Softener in FillWater Flow Through Softener in Backwash Water Flow Through Softener in Fast Rinse ElectronicsAutomatic Bypass Salt Adding to the Storage TANK, Salt Bridge Salt BridgeSalt Bridge Keeping the Water Softener Clean Cleaning Nozzle & VenturiIron from Resin BED From Freezing Protect the Water SoftenerProgram Checklist ... to Help YOU Save MoneyBypass Valves Dimensions / SpecificationsSingle Bypass Valve BypassPressure Drop PSI vs. Flow Rate GPM Troubleshooting Make These Initial Checks FirstVance Regeneration Check Most Likely CodePossible Defect Less LikelyHF45 shows Brining Cycle Flow Rates Gallons PER MINBackwash Brine RinseDisassembly Rotary Valve ServiceAssembly Lieve PressureWater Flow Through the Softener Valve Service Cycle SectionFill Cycle Backwash Cycle Fast Rinse Cycle Water Flow Through the Softener ValveRepair Parts for Water Softener KEY Part Water Softener CompleteNO. Number DescriptionInlet Outlet Grounding Clamps Repair Parts for Water Softener Repair Parts for Water Softener Valveassembly Bypass Installation Valve Valve AssemblyModel Part DescriptionWater Softeners

625.3888, 625.38888 specifications

The Kenmore 625.38888 and 625.3888 are high-efficiency water softeners that cater to households with diverse water quality needs. Known for their advanced technology and reliable performance, these models are designed to tackle hard water issues while enhancing water quality and extending the lifespan of plumbing appliances.

One of the main features of the Kenmore 625.38888 and 625.3888 is their highly efficient ion-exchange process. This process effectively removes hard minerals such as calcium and magnesium from the water, which helps to prevent scale buildup in pipes, appliances, and fixtures. By softening the water, these models improve the effectiveness of soaps and detergents, leading to cleaner dishes, brighter laundry, and reduced soap scum.

Both models boast a user-friendly digital control panel, which allows homeowners to easily monitor and adjust settings. This digital interface includes features such as a programmable regeneration cycle, which can be set based on water usage patterns. This ensures that the softener operates efficiently and only regenerates as needed, saving salt and water in the process.

Another characteristic worth mentioning is the high-capacity resin tank used in these models. With a robust design, the resin tank can handle larger volumes of water, making it ideal for families or homes with significant water demands. Additionally, the Kenmore 625.38888 and 625.3888 are equipped with a corrosion-proof brine tank, which enhances durability and reduces the risk of leaks or damage over time.

The installation of these water softeners is straightforward, allowing users to have them up and running with minimal hassle. Along with a comprehensive installation guide, these models typically come with essential components needed for hook-up. The compact design ensures that they can fit in smaller spaces without overwhelming the area.

In terms of maintenance, the Kenmore 625.38888 and 625.3888 require minimal upkeep. Regularly checking and refilling the salt in the brine tank ensures optimal functioning, while periodic cleaning of the resin tank maintains efficiency.

In summary, the Kenmore 625.38888 and 625.3888 water softeners provide a reliable solution for hard water challenges. With their efficient ion-exchange technology, user-friendly controls, high-capacity design, and easy installation and maintenance, these models are well-suited for various households looking to enhance their water quality.
Top Page Image Contents