Kenmore 625.38556 owner manual Tds

Page 22

Supply

water

pressure

limits

 

40-100 psi

(280-689

kPa)

Supply

water

temperature

 

limits

.................................................

40-100

°F (5-40°C)

Maximum

total

dissolved

solids

(TDS}

 

 

2000

ppm

Maximum

water

 

hardness

@ 6.9 pH

 

 

10 gpg

Maximum

iron,

manganese,

hydrogen

sulfide

 

 

 

0

Chlorine

in

water

supply

(max.

ppm)

..........................................................

 

 

 

2.0

Supply

water

pH

limits

(pH)

 

 

 

 

4-10

Product

(quality)

 

water,

 

24

hours '

14.53

gal. (55

liters)

Waste

water

per

gallon

 

of

product

water _

5

gal.

(18.9

liters)

Percent rejection

of

TDS,

minimum

(new membrane)

_

90-95

Automatic

shutoff

control

....................................................................

 

 

yes

Efficiency

_

 

 

 

 

9.7

%

Recovery

3

 

 

 

 

19.7

%

This system conforms

to

NSF/ANSI

58 and 42 for

the specific performance

claims as verified and substantiated

by

test data.

 

 

 

 

 

 

 

 

_@ Feed water supply at 50 psi, 77°F, and 750 TDS. Quality water production, amount of waste water and percent rejection all vary with changes in pressure, temperature and total dissolved solids.

_Efficiency rating means the percentage of the influent water to the system that is available to the user as reverse osmosis treated water under operating conditions that approximate typical daily usage.

3Recovery rating means the percentage of the influent water to the membrane portion of the system that is available to the user as reverse osmosis treated water when the system is operated without a storage tank or when the storage tank is bypassed.

Non-potable Water Sources: Do not attempt to use this product to make safe drinking water from non-potable water

sources. Do not use the system on microbiologically unsafe water, or water of unknown quality without an adequate disinfection before or after the system. This system is certified for cyst reduction and may be used on disinfected water that may contain filterable cysts.

Arsenic Reduction: This system shall only be used for arsenic reduction on chlorinated water supplies containing detectable residual free chlorine at the system inlet. Water systems using an inline chlorinator should provide a one minute chlorine contact time before the reverse osmosis system.

Nitrate/Nitrite Test Kit: This system is acceptable for treatment of influent concentrations of no more than 27mg/L

nitrate and 3mg/L nitrite in combination measured as N. It is certified for nitrate/nitrite reduction only for water sup-

plies with a pressure of 280 kPa (40 psig) or greater. This system is supplied with a nitrate/nitrite test kit. Product water should be monitored periodically according to the instructions provided with the test kit.

TDS Test Kits: TDS test kits are available by calling 1--800--949--8220, or check the water testing section of your local phone directory.

Installations In The Commonwealth Of Massachusetts: The Commonwealth of Massachusetts requires installation be performed by a licensed plumber and do not permit the use of saddle valves. Plumbing code 248--CMR of the Commonwealth of Massachusetts must be followed in these cases.

Product Water Testing: The Reverse Osmosis System contains a replaceable treatment component critical for the effec- tive reduction of total dissolved solids. Product water should be tested periodically to verify that the system is perform- ing properly.

Replacement of the reverse osmosis component: This reverse osmosis system contains a replaceable component criti- cal to the efficiency of the system. Replacement of the reverse osmosis component should be with one of identical specifications, as defined by the manufacturer, to assure the same efficiency and contaminant performance.

Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Reverse Osmosis System Save this ManualONE Year Full Warranty on Reverse Osmosis System Osmosis Inspect Shipment Remote Location Plan Your InstallationUnder Sink Location Check Space RequirementsTypical Remote Installation Prepare Site for Installation OverviewInstall Cold Water Supply Fitting Choose Type of Water Fitting to InstallOptional Pipe Fittings Install Drain Adapter KIT IntroductionInstall a Remote Drain Point and AIR GAP Remote LocationInstallreverseosmosisfilterassembly Install Storage TankInstall Reverse Osmosis Faucet Select Location of Reverse Osmosis Faucet Mounting HoleInstall Battery Faucet ElectronicsHOW to CUT and Connect the Tubes Connect tubesConnect Yellow Tube to Storage Tank Connect Bluetube to Reverseosmosis AssemblyConnect RED Tube to Reverse Osmosis Faucet Sanitizethesystem Pressuretestthesystem Purging the SystemHOW Your Reverse Osmosis System Works Reverse Osmosis Water Flow Schematic Water Flow Description PREFILTER/POSTFILTER Maintenance RO Membrane Cartridge MaintenanceReverse Osomosis Cartridge Replacement PREFILTER/POSTFILTER Cartridge ReplacementChange Battery Change Collet and O-RINGTDS Page Correction Lem le push11 onn 162 Monitor Ring, Brushed Nickel 7289736 Faucet Your Home
Related manuals
Manual 28 pages 49.65 Kb Manual 28 pages 57.61 Kb Manual 28 pages 16.63 Kb

625.38556 specifications

The Kenmore 625.38556 is a highly efficient and versatile air purifier designed to enhance indoor air quality. With its modern design and well-thought-out features, this model is ideal for those looking to combat allergens, dust, odors, and other airborne irritants in their living spaces.

One of the standout features of the Kenmore 625.38556 is its advanced filtration system, which includes a True HEPA filter. This type of filter is capable of capturing 99.97% of particles as small as 0.3 microns, making it highly effective against pollen, mold spores, pet dander, and smoke. The air purifier also features a pre-filter that captures larger particles, prolonging the life of the HEPA filter and ensuring optimal performance.

To further enhance its functionality, the Kenmore 625.38556 is equipped with an activated carbon filter. This filter effectively absorbs odors, including those from pets, cooking, and smoke, ensuring that the air remains fresh and clean. Combined with the HEPA filtration system, this air purifier excels in creating a healthier indoor environment.

In terms of user convenience, the Kenmore 625.38556 boasts a range of operating modes. It comes with multiple fan speeds, allowing users to customize airflow based on their current needs. The quiet operation is a significant advantage, making it suitable for use in bedrooms, nurseries, or offices without causing disturbances.

Additionally, the air purifier features a built-in air quality indicator, which changes color based on the detected air quality. This real-time feedback allows users to easily ascertain when the air in their space is clean or in need of purification.

Another thoughtful characteristic is its filter replacement indicator, which alerts users when it’s time to change the filters. This ensures that the air purifier maintains its high performance over time without unexpected lapses in filtration efficacy.

With its stylish design and compact size, the Kenmore 625.38556 can fit seamlessly into any room decor, making it a practical and attractive addition to a home. Whether you are dealing with common allergens or simply want to improve your indoor air quality, the Kenmore 625.38556 is a reliable choice that combines efficiency, technology, and aesthetics into one exceptional product.
Top Page Image Contents