Kenmore 625.38556 owner manual HOW to CUT and Connect the Tubes, Connect tubes

Page 14

HOW TO CUT AND CONNECT THE TUBES

Your Reverse Osmosis Water System includes push-in fit- tings for quick tubing connection. Review the following instructions before connecting the tubes in the next step. Cut tubes to length

1.Use a sharp cutter or knife to cut the end of tubing. Always cut the tubing square. See Figure 16.

2.Inspect the end (about 1") of the tubing to be sure there are no nicks, scratches or other rough spots. If needed, cut the tubing again. See Figure 16.

NOTE: Tubing lengths should allow for the removal of the assembly from the hanger washers for servicing. If tubing lengths are shortened for neater appearance, it may be necessary to keep the assembly on the hanger washers for service.

Connect tubes

1.Push tubing through collet, until it engages the o-ring. See Figure 17. Continue pushing until the tube bottoms out against the back of the fitting. See Figure 18. A common mistake is to stop pushing when the tube engages the o-ring. This will lead to future leaks. When a 1/4" tube is fully engaged, 11/16" of the tube has entered the fitting. When a 3/8" tube is fully engaged, 3/4" of the tube has entered the fitting. See Figures 17 &18.

2.If using tubing other than tubing supplied with the sys- tem, be sure it is of high quality, exact size and round- ness with a smooth surface.

Disconnect Tubes

1.Push the collet inward with a finger tip. See Figure 20.

2.Continue holding collet inward while pulling the tubing out. See Figure 20.

Fitting

O-Ring Seat

Callet

Collet and O-Ring

Figure 20

Cut tubing square with end of tubing round,

smooth, with no cuts, nicks or flat spots.

Tube Correctly Cut

Figure 16

Caltet

__f

Tube Partially Engaged With Fitting

Figure 17

O-Ring

Tube Fully Engaged With Fitting

Figure 18

Cotlet (Depress to

Remove Tubing)

Disconnect Tubing

Figure 19

Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Reverse Osmosis System Save this ManualONE Year Full Warranty on Reverse Osmosis System Osmosis Inspect Shipment Remote Location Plan Your InstallationUnder Sink Location Check Space RequirementsTypical Remote Installation Prepare Site for Installation OverviewOptional Pipe Fittings Choose Type of Water Fitting to InstallInstall Cold Water Supply Fitting Install Drain Adapter KIT IntroductionInstall a Remote Drain Point and AIR GAP Remote LocationInstallreverseosmosisfilterassembly Install Storage TankInstall Reverse Osmosis Faucet Select Location of Reverse Osmosis Faucet Mounting HoleInstall Battery Faucet ElectronicsHOW to CUT and Connect the Tubes Connect tubesConnect RED Tube to Reverse Osmosis Faucet Connect Bluetube to Reverseosmosis AssemblyConnect Yellow Tube to Storage Tank Sanitizethesystem Pressuretestthesystem Purging the SystemHOW Your Reverse Osmosis System Works Reverse Osmosis Water Flow Schematic Water Flow Description PREFILTER/POSTFILTER Maintenance RO Membrane Cartridge MaintenanceReverse Osomosis Cartridge Replacement PREFILTER/POSTFILTER Cartridge ReplacementChange Battery Change Collet and O-RINGTDS Page Correction Lem le push11 onn 162 Monitor Ring, Brushed Nickel 7289736 Faucet Your Home
Related manuals
Manual 28 pages 49.65 Kb Manual 28 pages 57.61 Kb Manual 28 pages 16.63 Kb

625.38556 specifications

The Kenmore 625.38556 is a highly efficient and versatile air purifier designed to enhance indoor air quality. With its modern design and well-thought-out features, this model is ideal for those looking to combat allergens, dust, odors, and other airborne irritants in their living spaces.

One of the standout features of the Kenmore 625.38556 is its advanced filtration system, which includes a True HEPA filter. This type of filter is capable of capturing 99.97% of particles as small as 0.3 microns, making it highly effective against pollen, mold spores, pet dander, and smoke. The air purifier also features a pre-filter that captures larger particles, prolonging the life of the HEPA filter and ensuring optimal performance.

To further enhance its functionality, the Kenmore 625.38556 is equipped with an activated carbon filter. This filter effectively absorbs odors, including those from pets, cooking, and smoke, ensuring that the air remains fresh and clean. Combined with the HEPA filtration system, this air purifier excels in creating a healthier indoor environment.

In terms of user convenience, the Kenmore 625.38556 boasts a range of operating modes. It comes with multiple fan speeds, allowing users to customize airflow based on their current needs. The quiet operation is a significant advantage, making it suitable for use in bedrooms, nurseries, or offices without causing disturbances.

Additionally, the air purifier features a built-in air quality indicator, which changes color based on the detected air quality. This real-time feedback allows users to easily ascertain when the air in their space is clean or in need of purification.

Another thoughtful characteristic is its filter replacement indicator, which alerts users when it’s time to change the filters. This ensures that the air purifier maintains its high performance over time without unexpected lapses in filtration efficacy.

With its stylish design and compact size, the Kenmore 625.38556 can fit seamlessly into any room decor, making it a practical and attractive addition to a home. Whether you are dealing with common allergens or simply want to improve your indoor air quality, the Kenmore 625.38556 is a reliable choice that combines efficiency, technology, and aesthetics into one exceptional product.
Top Page Image Contents