Chauvet 2 user manual Safety Instructions

Page 4

Safety Instructions

Please read these instructions carefully. It includes important information about the installation, usage and maintenance of this product.

Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.

Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture.

This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to rain or moisture.

Make sure there are no flammable materials close to the unit while operating.

The unit must be installed in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces. Be sure that no ventilation slots are blocked.

Always disconnect from power source before servicing or replacing fuse and be sure to replace with same fuse source.

Secure fixture to fastening device using a safety chain.

Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at temperatures higher than this.

In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center.

Never connect the device to a dimmer pack.

Make sure the power cord is never crimped or damaged.

Never disconnect the power cord by pulling or tugging on the cord. Avoid direct eye exposure to the light source while it is on.

Use only water-based fog fluid. Do not use oil based fluid.

Arena Hazer™ 2 User Manual

4

4/20/2010 4:23 PM

Image 4
Contents Snapshot Table of Contents What is included Before YOU BeginUnpacking Instructions Manual ConventionsSafety Instructions Introduction FeaturesDMX Channel Summary Product Overview Product Dimensions Setup AC PowerBreaker Reset LED-Illuminated TankOperating Instructions Configuring the Starting AddressControl Panel Functions Adjustable Blower Angles DMX Channel ValuesLED Indicators Auto Cut-Off FeatureGeneral Troubleshooting Contact UsAppendix General MaintenanceDMX Primer Maintenance DMX + Fixture LinkingInput DMX Output Pin to 5-Pin Conversion Chart Returns Procedure ClaimsTechnical Specifications
Related manuals
Manual 36 pages 30.83 Kb Manual 13 pages 2.78 Kb

2 specifications

The Chauvet 2 is a sophisticated lighting fixture that has gained popularity within the entertainment and stage lighting industry. Known for its versatility and advanced features, the Chauvet 2 series includes various models that cater to different lighting needs, making it a frequent choice for concert tours, theatrical productions, and corporate events.

One of the main features of the Chauvet 2 is its robust LED technology. With energy-efficient LED lights, these fixtures provide vibrant colors and impressive brightness while consuming significantly less power than traditional lighting solutions. The fixtures are designed with high-output LEDs that ensure an impactful lighting experience, even in large venues.

Chauvet 2 fixtures often come equipped with a wide range of color-mixing capabilities. Many models utilize RGB color mixing, allowing users to create millions of distinct color combinations. This characteristic is essential for lighting designers looking to enhance their productions with dynamic and visually appealing effects. Some fixtures even incorporate additional features like UV LEDs for creating unique textures and effects.

Another important aspect of the Chauvet 2 series is its user-friendly control options. Many models support DMX control, permitting precise adjustments and programming of lighting effects. Additionally, some fixtures feature built-in shows and automated programming modes, which provide flexibility for users who may not have extensive experience in lighting design.

Durability is also a key characteristic of the Chauvet 2 range. Built with high-quality materials that ensure longevity, these fixtures are designed to withstand the rigors of touring and heavy use in professional environments. Features such as rugged housing and efficient thermal management systems help to ensure reliable performance over time.

Portability is crucial for many lighting professionals, and the Chauvet 2 series excels in this area. Compact and lightweight designs allow for easy transport and installation, making the fixtures suitable for a range of setups, from small venues to large stages. The inclusion of various mounting options enhances flexibility and ease of use.

In summary, the Chauvet 2 series stands out for its LED technology, vibrant color mixing, user-friendly controls, durability, and portability. These features make it an exceptional choice for lighting professionals seeking to deliver high-quality visual experiences in diverse performance settings.