Harman-Kardon 950-0321-001 owner manual Connections, Wall-Mounting the BDS 700 Center Speaker

Page 14

BDS

Mounting Options for Satellite and Center Speakers, and Connections

You can pivot the wall-mounted speaker from side to side; however, attempting to tilt it up or down will damage the bracket and possibly the wall, which would not be covered by your warranty.

Wall-Mounting the BDS 700 Center Speaker

1.Determine the location for the speaker (see Placing the Speakers (BDS 800, BDS 700, BDS 400 and BDS 300 Systems), on page 10, for more information). If possible, position the speaker so that one of the mounting screws (not included; use size #10) can be installed directly into a wall stud. If that is not possible, use optional wall anchors that are rated to support at least 25 lb (11.3kg) and are appropriate for the construction and materials of your wall. The customer is responsible for the proper selection and use of mounting hardware, available through hardware stores, to wall-mount the speaker properly and safely.

2.Bring the speaker cable through the wall-bracket attachment plate as shown, and mount the attachment plate on the wall in the desired location.

Bring Cable Through Opening

Use Mounting Hardware Appropriate for

Wall Construction and Materials

3.Remove the rubber pads from the foot rests on the bottom of the center speaker and connect the speaker leads to the terminals on the underside of the speaker. Remember to observe the correct polarity. See Connecting the Speaker Terminals (BDS 700 and BDS 300 systems), on page 15, for more information.

Connect Cable

Remove Pads

4.Use the supplied screws to attach the speaker to the wall-mount bracket. The screws thread into the center foot-rest openings that were exposed when you removed the rubber pads in the previous step.

Use Supplied Screws to Attach

Speaker to Bracket

Thread Screws into Center Openings

Connections

CAUTION: Before making any connections to the BDS receiver, ensure that the receiver’s AC cord is unplugged from the receiver and the AC outlet. Making speaker connections with the receiver plugged in and turned on could damage the speakers.

Speakers and receivers/amplifiers have corresponding (+) and (–) connection terminals. Your system’s satellite speakers use red to denote the (+) terminal and black for the (–) terminal.

tThe BDS 2 receiver uses white to denote the left channel (+) terminal and red for the right channel (+) terminal. Black is used to denote the (–) terminal of both channels.

tThe BDS 5 receiver uses the following colors to denote the (+) terminals of the various channels:

Front Left (+): White

Surround Left (+): Blue

Front Right (+): Red

Surround Right (+): Gray

Center (+): Green

Black is used to denote the (–) terminals of all channels on the BDS 5 receiver.

The speaker wires included with your system have colored bands at both ends of the (+) conductor; the colors correspond to the receiver’s (+) terminal colors. This system helps you connect each speaker to the correct receiver or amplifier terminals. In addition to the colored bands at each end, each speaker wire’s (+) terminal has ribs molded into its insulation to help identify it.

Be sure to connect each speaker identically: (+) on the speaker to (+) on the receiver or amplifier, and (–) on the speaker to (–) on the receiver or amplifier. Miswiring one or more speakers results in thin sound, weak bass and a poor stereo image.

CAUTION: Make sure the (+) and (–) bare wires do not touch each other or the other terminal. Touching wires can cause a short circuit that can damage your receiver or amplifier.

Connecting the Satellite and Center Speakers (BDS 800 and BDS 400 systems)

Front Right

 

 

 

 

 

 

 

 

Front Left

 

 

 

Center*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

–

+

–

+

–

+

Front Right Cable

 

Center Cable

Front Left Cable

 

(White Bands)

(Red Bands)

 

(Green Bands)

 

 

 

Surround Right Cable

Surround Left Cable

BDS Receiver (BDS 5 shown)

 

(Gray Bands)

(Blue Bands)

 

–

+

–

+

Surround Right*

Surround Left*

* Speakers included only in BDS 800 system

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents BDS BDS Cleaning Verify Line Voltage Before UsingInstallation Location IntroductionSystem Components System Components and Supplied AccessoriesSupplied Accessories Receiver Front-Panel Controls Receiver Front-Panel ControlsReceiver Rear-Panel Connections AC Power ConnectorReceiver Rear-Panel Connections Optical Digital InputsSubwoofer Controls and Connections Power Switch Power CordSubwoofer Controls and Connections Remote Control Functions Remote Control FunctionsEnglish Placing the Front Left and Front Right Speakers Placing the SubwooferWall-Mounting the Soundbar Shelf PlacementPlacing the Speakers BDS 600 System Mounting Options for Satellite and Center Speakers Position as you rotate it on the mountConnect the speaker wire to the speaker terminals Wall-Mounting the BDS 800 Center SpeakerFront Right + Red ConnectionsWall-Mounting the BDS 700 Center Speaker + C + R + Connecting the Speaker Terminals BDS 600 systemSystems Connecting the Radio Antenna Connecting the Subwoofer all systemsConnecting a TV or Video Display OutputFor details Connecting the AC PowerNetwork wall jack that has Internet access Abnormal operationProgramming Remote Control Punch-Through Commands Preparing the Remote ControlUsing the Remote Programming the RemoteSetup Wizard Setting Up the ReceiverUsing the Remote After it is Programmed Network Setup Wizard Select to adjust system settings Settings MenusGeneral Settings Setting Up the Receiver Display Settings Audio SettingsSetting the speaker distances Information MenuHome Menu Using the receiverAdjusting Individual Speaker Volumes Press the Home button to display the Home Menu screenUsing the Receiver and Using the Disc Player Using the Disc PlayerSupported Media Codecs Playback FeaturesSupported Disc Formats Loading and Playing DiscsUsing the Radio Listening to Your iPod/iPhoneTo listen to a preset station Setting and Recalling Preset StationsTo set the currently tuned-in station as a preset Listening to Audio SourcesViewing Photos Playing Music FilesTo Create a Playlist Using PlaylistsPlaying Videos Press the Home button. The Home menu will appearTroubleshooting Problem SolutionManufacturer Aux Component Remote-Control Code ListAux Component Remote-Control Code List 0175 00690167 0160 0128 0123 0115 0181 0180 0179 0177 0148Cable Tuners Satellite Tuners 5065 5039 5001 5058 50816067 6068 6069 6070 6071 5049Disc Player Section SpecificationsFM Tuner Section Video SectionSubwoofer all systems SAT-TS60 Satellites CEN-TS60 CenterSB 10 Soundbar Harman Consumer, Inc

950-0321-001 specifications

The Harman-Kardon 950-0321-001 is a versatile Bluetooth speaker that combines sophisticated design with advanced audio technology, making it a popular choice among music enthusiasts and casual listeners alike. Its sleek and modern design allows it to blend seamlessly into various environments, from living rooms to outdoor gatherings, while its durable construction ensures long-lasting performance.

One of the main features of the Harman-Kardon 950-0321-001 is its impressive sound quality. Equipped with high-performance drivers and a well-tuned acoustic system, this speaker delivers rich bass, clear mids, and crisp highs. The speaker is capable of producing room-filling sound, making it suitable for both intimate settings and larger spaces. The use of Harman's patented EQ technology further refines audio output, allowing for an optimal listening experience regardless of the genre of music.

The speaker's Bluetooth connectivity is another standout feature. With a wireless range of up to 30 feet, users can easily connect their smartphones, tablets, or other Bluetooth-enabled devices without being tethered by wires. The device supports multiple connections, allowing several users to take turns playing their favorite tracks with ease. Additionally, the built-in rechargeable battery provides up to 10 hours of playtime, ensuring that the music keeps flowing during parties, picnics, or any outdoor activities.

Portability is a notable characteristic of the Harman-Kardon 950-0321-001. Weighing in at just a few pounds, it is lightweight and easy to carry, making it an ideal companion for travel or on-the-go use. Furthermore, its water-resistant design allows it to withstand splashes and light rain, providing an added layer of protection in outdoor environments.

For those who appreciate a sophisticated aesthetic, the Harman-Kardon 950-0321-001 is available in various color options to suit personal preferences. Its premium materials not only contribute to its visual appeal but also enhance durability, ensuring that it stands up to everyday use.

In summary, the Harman-Kardon 950-0321-001 is more than just a Bluetooth speaker; it is an embodiment of excellent sound quality, advanced technology, and stylish design. With features like powerful audio performance, Bluetooth connectivity, battery life, portability, and durability, it caters to a wide range of audiophiles and casual listeners alike, making it a worthy addition to any audio setup.
Top Page Image Contents