Harman-Kardon 950-0321-001 Subwoofer Controls and Connections, Power Switch Power Cord

Page 7

BDS

Subwoofer Controls and Connections

Subwoofer Controls and Connections

Phase Switch

Bass-Boost Switch

Power-On Mode Switch

Subwoofer Level Control

External Trigger Input Connector

Line-Level In LFE Connector Line-Level In L/R Connector

Power Switch

Power Cord

PL0004-01001

ENGLISH

Phase Switch: This switch determines whether the subwoofer driver’s piston-like action moves in and out in phase with the satellite speakers. If the subwoofer were to play out of phase with the satellite speakers, the sound waves produced by the subwoofer could be cancelled out, reducing bass performance and sonic impact. This phenomenon depends in part on the relative placement of all the speakers in the room.

Although in most cases the Phase switch should be left in the “Normal” position, there is no absolutely correct setting for it. When the subwoofer is properly in phase with the satellite speakers, the sound will be clearer and have maximum impact. It will make percussive sounds like drums, piano and plucked strings sound more lifelike. The best way to set the Phase switch is to listen to music that you are familiar with and set the switch in the position that gives drums and other percussive sounds maximum impact.

Bass-Boost Switch: Set this switch to “On” to enhance the subwoofer’s low-frequency performance. Set this switch to “Off” for normal low-frequency performance.

Power-On Mode Switch: When this switch is set in the “Auto” position and when the Power switch is set to “On,” the subwoofer will automatically turn itself on when it receives an audio signal. It will enter the Standby mode if it receives no audio signal for 20 minutes. When the Power-On Mode switch is set in the “On” position, the subwoofer will remain on whether or not it is receiving an audio signal.

An LED on the subwoofer’s top panel indicates whether the subwoofer is in the On or Standby mode:

tWhen the LED glows white, the subwoofer is turned on.

tWhen the LED is not lit up, the subwoofer is in Standby mode.

When the Main Power Switch is set to Off, the LED will not light up, no matter what setting the Power-On Mode switch is in.

Subwoofer Level Control: Use this control to adjust the subwoofer’s volume. Turn clockwise to increase the volume; turn counterclockwise to decrease the volume.

External Trigger Input Connector: NOTE: This connector is NOT used with the BDS receiver. If you connect the subwoofer to a different component that has a voltage trigger output connection, connect the External Trigger Input to the trigger output of the other compatible component. Whenever the subwoofer detects a trigger signal between 3V and 30V (AC or DC), the subwoofer’s amplifier will turn on. The subwoofer’s amplifier will turn off after the trigger signal ceases, even when the Power-On Mode switch is in the “Auto” position.

Line-Level In LFE Connector: Use the supplied mono RCA audio cable (with the purple connectors) to connect the Line-Level In LFE connector to the BDS receiver’s Subwoofer output.

Line-Level In L/R Connectors: NOTE: These connectors are NOT used with the

BDS receiver. If you connect the subwoofer to a different unit that does not have a dedicated, low-pass-filtered subwoofer output, use these connectors.

tIf the unit has a separate subwoofer output, use the supplied mono RCA audio cable to connect the unit’s subwoofer output to either one of the subwoofer’s Line-Level In L/R connectors.

tIf your unit does not have a separate subwoofer output, use two Y-adapters (not supplied). Connect one adapter’s single end to the unit’s preamp output for that channel. Connect one of this adapter’s dual ends to the main amp input for that channel, and connect the adapter’s other dual end to one of the subwoofer’s Line-Level In L/R connectors. Repeat this process with the other Y-adapter, preamp channel, main amp input and subwoofer’s Line-Level In L/R connector.

Main Power Switch: Set this switch in the On position to turn the subwoofer on. The subwoofer will then either be on or in Standby mode, depending on the setting of the subwoofer’s Power-On Mode switch.

Power Cord: After you have made and verified all subwoofer and speaker connections described in this manual, plug the Power cord into an active, unswitched electrical outlet for proper operation of the subwoofer. DO NOT plug this cord into the accessory outlets found in some audio components.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents BDS BDS Introduction Verify Line Voltage Before UsingInstallation Location CleaningSupplied Accessories System Components and Supplied AccessoriesSystem Components Receiver Front-Panel Controls Receiver Front-Panel ControlsOptical Digital Inputs AC Power ConnectorReceiver Rear-Panel Connections Receiver Rear-Panel ConnectionsSubwoofer Controls and Connections Power Switch Power CordSubwoofer Controls and Connections Remote Control Functions Remote Control FunctionsEnglish Placing the Subwoofer Placing the Front Left and Front Right SpeakersPlacing the Speakers BDS 600 System Shelf PlacementWall-Mounting the Soundbar Position as you rotate it on the mount Mounting Options for Satellite and Center SpeakersWall-Mounting the BDS 800 Center Speaker Connect the speaker wire to the speaker terminalsWall-Mounting the BDS 700 Center Speaker ConnectionsFront Right + Red Systems Connecting the Speaker Terminals BDS 600 system+ C + R + Output Connecting the Subwoofer all systemsConnecting a TV or Video Display Connecting the Radio AntennaAbnormal operation Connecting the AC PowerNetwork wall jack that has Internet access For detailsProgramming the Remote Preparing the Remote ControlUsing the Remote Programming Remote Control Punch-Through CommandsUsing the Remote After it is Programmed Setting Up the ReceiverSetup Wizard General Settings Settings MenusNetwork Setup Wizard Select to adjust system settings Display Settings Audio Settings Setting Up the ReceiverInformation Menu Setting the speaker distancesPress the Home button to display the Home Menu screen Using the receiverAdjusting Individual Speaker Volumes Home MenuUsing the Disc Player Using the Receiver and Using the Disc PlayerLoading and Playing Discs Playback FeaturesSupported Disc Formats Supported Media CodecsListening to Your iPod/iPhone Using the RadioListening to Audio Sources Setting and Recalling Preset StationsTo set the currently tuned-in station as a preset To listen to a preset stationPlaying Music Files Viewing PhotosPress the Home button. The Home menu will appear Using PlaylistsPlaying Videos To Create a PlaylistProblem Solution TroubleshootingAux Component Remote-Control Code List Aux Component Remote-Control Code ListManufacturer 0181 0180 0179 0177 0148 00690167 0160 0128 0123 0115 0175Cable Tuners Satellite Tuners 5049 50816067 6068 6069 6070 6071 5065 5039 5001 5058Video Section SpecificationsFM Tuner Section Disc Player SectionSB 10 Soundbar SAT-TS60 Satellites CEN-TS60 CenterSubwoofer all systems Harman Consumer, Inc

950-0321-001 specifications

The Harman-Kardon 950-0321-001 is a versatile Bluetooth speaker that combines sophisticated design with advanced audio technology, making it a popular choice among music enthusiasts and casual listeners alike. Its sleek and modern design allows it to blend seamlessly into various environments, from living rooms to outdoor gatherings, while its durable construction ensures long-lasting performance.

One of the main features of the Harman-Kardon 950-0321-001 is its impressive sound quality. Equipped with high-performance drivers and a well-tuned acoustic system, this speaker delivers rich bass, clear mids, and crisp highs. The speaker is capable of producing room-filling sound, making it suitable for both intimate settings and larger spaces. The use of Harman's patented EQ technology further refines audio output, allowing for an optimal listening experience regardless of the genre of music.

The speaker's Bluetooth connectivity is another standout feature. With a wireless range of up to 30 feet, users can easily connect their smartphones, tablets, or other Bluetooth-enabled devices without being tethered by wires. The device supports multiple connections, allowing several users to take turns playing their favorite tracks with ease. Additionally, the built-in rechargeable battery provides up to 10 hours of playtime, ensuring that the music keeps flowing during parties, picnics, or any outdoor activities.

Portability is a notable characteristic of the Harman-Kardon 950-0321-001. Weighing in at just a few pounds, it is lightweight and easy to carry, making it an ideal companion for travel or on-the-go use. Furthermore, its water-resistant design allows it to withstand splashes and light rain, providing an added layer of protection in outdoor environments.

For those who appreciate a sophisticated aesthetic, the Harman-Kardon 950-0321-001 is available in various color options to suit personal preferences. Its premium materials not only contribute to its visual appeal but also enhance durability, ensuring that it stands up to everyday use.

In summary, the Harman-Kardon 950-0321-001 is more than just a Bluetooth speaker; it is an embodiment of excellent sound quality, advanced technology, and stylish design. With features like powerful audio performance, Bluetooth connectivity, battery life, portability, and durability, it caters to a wide range of audiophiles and casual listeners alike, making it a worthy addition to any audio setup.
Top Page Image Contents