Cuisinart WCH-1000, IB-8895A manual Storing the unit, Technical specifications

Page 7

storing the unit

Bottom of unit

1. Unplug the unit from outlet.

 

2. Remove empty water tanks, filter and cover.

Drainage

 

3. Bring base to sink.

Plug

4.Drain internal reservoir by tilting unit slightly and removing the plastic drainage plug from bottom of unit. Plug is tightly inserted and must be gently, but firmly, worked to remove.

5.When water has completely drained, replace plug, tanks,

filter and cover.

6. Your Cuisinart Countertop Filtration System is ready to store.

technical specifications

Unit: WCH-1000

1 Cuisinart®

® Countertop

 

Filtration System

 

 

1 Cuisinart® Water Filter

System Capacity

up to 3 months/ 48 gallons/ 181 liters

Maximum Input Temperature

104°F (40°C)

 

Minimum Input Temperature

34°F (1°C)

 

Maximum Output Temperature

104°F (40°C)

 

Minimum Output Temperature

44°F (7°C)

 

Rated Service Flow

6 gallons / 22.7 liters per day

 

(may vary according to water conditions)

Electrical Requirements

AC~120V 60Hz 1A 75W

 

System Tested and Certified by WQA against NSF/ANSI Standard 53 for the reduction of Lead, Benzene, Cadmium, Copper, Mercury, Tetrachloroethylene, Toluene, and Standard 42 for the reduction of Chlorine Taste and Odor.

See Performance Data Sheet for specific test conditions and results.

Claims are calculated based on WQA accepted practice of average percent reduction. The contaminants or other substances removed or reduced by this water treatment device are not necessarily in all users’ water. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Individuals requiring water of specific microbiological purity should consult their physician.

The Cuisinart® Countertop Filtration System processes approximately 48 gallons/181 liters. When the Cuisinart® Water Filter (GF-80) exceeds filtering capacity, replacement is essential for the product to perform as represented. In the United States, replacement filters cost generally $19.99 per filter. Replacement filters may be purchased at most retail outlets. The performance of the filter may vary based on local water conditions.

Hot water should not be used with the Cuisinart® Water Filter (GF-80) as it will affect the filter’s performance.

Refer to the Operating Instructions and Cleaning and Care for general unit operation and maintenance requirements. Testing was performed under standard laboratory conditions; actual performance may vary.



Page 6 Page 8
Image 7
Page 6 Page 8
Contents Cuisinart Countertop Filtration System Shown in Figure B, may be obtained so that a Special Cord SET InstructionsLug under the screw of the outlet cover plate Parts and Features ContentsIntroduction Empty bowl sideways Setup are completePreparing the Water Filter Filling the Upper and Lower TanksTips and Hints Cleaning and careSetting the Filter Timer Replacing Water FilterSymptom Possible Cause Solution TroubleshootingStoring the unit Technical specificationsPerformance Data Sheet for Models WCH-1000 and WCH-1500 Performance data sheetFor purchases made in Iowa Purchases Made in IowaLimited Three-Year Warranty WarrantyPage IB-8895A

IB-8895A, WCH-1000 specifications

The Cuisinart IB-8895A and WCH-1000 are two innovative kitchen appliances that simplify food preparation and enhance culinary creativity. Both devices showcase Cuisinart's commitment to quality and versatility in the kitchen.

The Cuisinart IB-8895A is an advanced immersion blender that brings power and convenience to everyday cooking tasks. With a powerful 500-watt motor, it effortlessly blends, purees, and mixes a variety of ingredients. The stainless steel shaft offers durability and easy cleaning, while the detachable design enables users to switch attachments for additional functionality. Included with the blender is a whisk attachment, making it easy to whip cream or beat egg whites to perfection. The ergonomic handle ensures a comfortable grip, allowing for extended use without fatigue, making it a go-to tool for both professionals and home cooks alike.

On the other hand, the Cuisinart WCH-1000 is a versatile wine chiller designed to keep your favorite wines at the perfect serving temperature. This sleek appliance boasts an adjustable temperature control that accommodates both red and white wines, ensuring you can enjoy each glass at its optimal temperature. Its 18-bottle capacity is perfect for those who appreciate wine, allowing for a substantial collection without taking up too much kitchen space. The Cuisinart WCH-1000 also features a stylish design with an elegant glass door, so you can show off your wine selection while keeping it at the ideal temperature.

Both the IB-8895A and WCH-1000 embody Cuisinart's focus on user-friendly interfaces and thoughtful design. The immersion blender sports a simple one-touch control for easy operation, while the wine chiller includes an LED temperature display that makes adjustments straightforward.

The technologies integrated into these devices are aimed at enhancing efficiency and elevating the user experience. The immersion blender uses advanced blending technology to ensure a smooth and consistent blend, reducing prep time in the kitchen. The wine chiller’s thermoelectric cooling system operates quietly, providing a peaceful environment while preserving the quality of your wine.

Together, the Cuisinart IB-8895A immersion blender and WCH-1000 wine chiller represent the perfect fusion of functionality and elegance, making them essential additions to any culinary space. Whether you're blending a creamy soup or chilling a fine Merlot, Cuisinart provides the tools needed to create and enjoy delightful meals and beverages.
Top Page Image Contents