Cuisinart IB-8895A, WCH-1000 Setup are complete, Preparing the Water Filter, Empty bowl sideways

Page 4

UNPACKING & PLACEMENT

2. Remove the filter timer from the lid by flipping

1. Remove your Cuisinart®

®

the lid over and pressing on the plastic tab.

3. Wash both tanks and plastic lid in mild, soapy

Countertop Filtration System carefully from

the box.

 

water, and rinse. Replace the filter timer.

2. Position the unit on a stable flat surface, close

4. Lift the filter from the bowl and allow water to

to a main power outlet. Avoid direct sunlight

drain.

and keep out of the reach of children.

NOTE: The filter's loose

 

 

3. Allow at least 3 inches of space around

carbon dust may slightly

the sides and rear of the unit for proper air

darken water while soaking.

circulation.

 

5. With the Cuisinart® logo

4. Remove filter from upper tank and carefully

facing up, insert the water

follow the SETUP instructions below. You will

filter into the upper water

need a large bowl, a pitcher (or another type

tank and push firmly into

of container) and a glass.

 

place.

NOTE: Do not plug in unit until ALL steps of

6. Place the upper tank on a

SETUP are complete.

 

pitcher (or another type of

Water Filter SetUp

 

container) and fill with cold

 

tap water. Allow to drain for

NOTE: For optimum filtering and flow rates,

5 minutes to flush out any

the water filter must be prepared and installed

remaining carbon dust, then

exactly as follows:

 

 

pour out remaining water.

 

 

Preparing the Water Filter

 

Water Dispenser SetUp

1. Remove the filter from its packaging.

NOTE: Use only cold tap water to fill the unit.

NOTE: The filter may contain a small amount

Filling the Upper and Lower Tanks

of loose carbon dust. It may also appear moist,

have a faint smell of plastic or a slight yellowish

1. Place the upper tank onto the lower tank and

tint – these are all normal. DO NOT wash filter

cover with the lid.

with soap or water.

 

 

Lid

2. Place water filter in

 

 

Upper

empty bowl sideways

 

(see image). Pressing it

 

water tank

 

 

firmly to the bottom of the

 

 

bowl, and being careful

 

Lower

not to pour water directly

 

water tank

onto the filter. Slowly add

 

 

enough cold water to fully submerge and

 

cover the filter by at least 1 inch. (You

 

should see bubbles escaping the filter.)

2. Place assembled tanks on base. NOTE: The

3. Continue to hold filter under water for at least

vertical groove on the upper tank must face

30 seconds.

 

the back of the unit.

4. Release the filter and let it

 

3. Carefully lift the flip top lid and add cold

soak at least 15 minutes.

 

 

water to the FILL line. NOTE: This is a gravity

NOTE: While soaking, the

 

 

fill system. To increase the filtering flow rate,

filter should be partially

 

 

continue adding water to the FILL line of the

submerged and may tilt to one side.

upper tank until tanks are completely full.

 

 

Installing the Prepared Water Filter

 

4. During the initial setup, allow 20–30 minutes

1. While the filter is soaking, remove the lid,

for water to filter into and completely fill upper

upper water tank and lower water tank.

and lower tanks.



Page 3 Page 5
Image 4
Page 3 Page 5
Contents Cuisinart Countertop Filtration System Shown in Figure B, may be obtained so that a Special Cord SET InstructionsLug under the screw of the outlet cover plate Parts and Features ContentsIntroduction Setup are complete Preparing the Water FilterFilling the Upper and Lower Tanks Empty bowl sidewaysCleaning and care Setting the Filter TimerReplacing Water Filter Tips and HintsTroubleshooting Symptom Possible Cause SolutionTechnical specifications Storing the unitPerformance data sheet Performance Data Sheet for Models WCH-1000 and WCH-1500Purchases Made in Iowa For purchases made in IowaWarranty Limited Three-Year WarrantyPage IB-8895A

IB-8895A, WCH-1000 specifications

The Cuisinart IB-8895A and WCH-1000 are two innovative kitchen appliances that simplify food preparation and enhance culinary creativity. Both devices showcase Cuisinart's commitment to quality and versatility in the kitchen.

The Cuisinart IB-8895A is an advanced immersion blender that brings power and convenience to everyday cooking tasks. With a powerful 500-watt motor, it effortlessly blends, purees, and mixes a variety of ingredients. The stainless steel shaft offers durability and easy cleaning, while the detachable design enables users to switch attachments for additional functionality. Included with the blender is a whisk attachment, making it easy to whip cream or beat egg whites to perfection. The ergonomic handle ensures a comfortable grip, allowing for extended use without fatigue, making it a go-to tool for both professionals and home cooks alike.

On the other hand, the Cuisinart WCH-1000 is a versatile wine chiller designed to keep your favorite wines at the perfect serving temperature. This sleek appliance boasts an adjustable temperature control that accommodates both red and white wines, ensuring you can enjoy each glass at its optimal temperature. Its 18-bottle capacity is perfect for those who appreciate wine, allowing for a substantial collection without taking up too much kitchen space. The Cuisinart WCH-1000 also features a stylish design with an elegant glass door, so you can show off your wine selection while keeping it at the ideal temperature.

Both the IB-8895A and WCH-1000 embody Cuisinart's focus on user-friendly interfaces and thoughtful design. The immersion blender sports a simple one-touch control for easy operation, while the wine chiller includes an LED temperature display that makes adjustments straightforward.

The technologies integrated into these devices are aimed at enhancing efficiency and elevating the user experience. The immersion blender uses advanced blending technology to ensure a smooth and consistent blend, reducing prep time in the kitchen. The wine chiller’s thermoelectric cooling system operates quietly, providing a peaceful environment while preserving the quality of your wine.

Together, the Cuisinart IB-8895A immersion blender and WCH-1000 wine chiller represent the perfect fusion of functionality and elegance, making them essential additions to any culinary space. Whether you're blending a creamy soup or chilling a fine Merlot, Cuisinart provides the tools needed to create and enjoy delightful meals and beverages.
Top Page Image Contents