Heat & Glo LifeStyle DAKOTA 42H Appliance Setup, Remove the Shipping Materials, Accessories

9Appliance Setup

A. Remove the Shipping Materials

Remove shipping materials from inside or underneath the fi rebox.

B. Clean the Appliance

Clean/vacuum any sawdust that may have accumulated in- side the fi rebox or underneath in the control cavity.

•Raise grate and place ember bed on fl oor of fi rebox (see Figure 9.1). Ensure ember bed does not cover burner.

•Ensure burner tube is positioned on raised burner supports.

•Ensure grate assembly is over burner assembly ember bed. Center from left to right. Place back legs in grate brackets (see Figure 9.1)

C. Accessories

Install approved accessories per instructions included with accessories. Refer to Section 13.

WARNING

Shock Risk

Fire Risk

Use ONLY optional accessories approved for this appliance.

•Using non-listed accessories voids warranty.

•Using non-listed accessories may result in a safety hazard.

•Only Hearth & Home Technologies approved accessories may be used safely.

Back legs in grate brackets

Figure 9.1 Placement of Embers

D. Lava Rock, Ember Bed, Grate Assembly & Placement

Placing the Ember Bed and Grate Assembly

WARNING

Explosion Risk

•Follow ember placement instructions in manual.

•Do NOT place embers directly over burner ports.

•Replace ember material annually.

Improperly placed embers interferes with proper burner operation.

Placing Lava Rock

•After logs have been placed spread part of the lava rock (included) between the burner and ashlip (see Figure 9.2).

•Do NOT use the entire bag of lava rock. Save remainder for future use.

Figure 9.2 Placement of Lava Rocks

Heat-N-Glo Lifestyle Collection • Dakota 42/Dakota 42H • 4036-905 Rev I • 10/05 15