3Framing and Clearances
Note:
•Illustrations refl ect typical installations and are FOR DESIGN PURPOSES ONLY.
•Illustrations/diagrams are not drawn to scale.
•Actual installation may vary due to individual design preference.
WARNING
Fire Risk
Provide adequate clearance:
•Around air openings.
•To combustibles.
•For service access.
Locate appliance away from traffi c areas.
A. Select Appliance Location
When selecting a location for your appliance it is important to consider the required clearances to walls (See Figure 3.1).
Note: For actual appliance dimensions refer to Section 13.
Note: If this surface is inside the building’s warm air envelope...
B
AF 
E
...then this surface must be an exterior wall system.
G
F
C
D
| A | B | C | D | E | F | G |
in. | 48 | 49 | 5/8 | 1/2 | |||
|
|
|
|
|
|
|
|
mm | 629 | 613 | 1219 | 1245 | 16 | 13 | 38 |
Figure 3.1 Appliance Locations
6 |
