A. Valve Service and Replacement
Figure 12.1 Tools Required
Tools Required
Phillips screwdriver
7/16 in., 5/8 in., 13/16 in., 15/16 in. wrenches
Figure 12.2 Loosen Refractory Retaining Strip
•The valve can be accessed through the valve access panel on the right side of the fireplace. Use a phillips screwdriver to remove the right refractory by removing the two screws securing the refractory retaining strip.
Figure 12.4 Remove Valve Access Panel
•Remove the inside valve access panel by lifting it up and out.
Figure 12.56 Remove Exterior Valve Access Panel
•Using a phillips screwdriver remove the exterior valve access panel.
Retaining
Strip
Figure 12.3 Lift Out Doors
•Remove the refractory side panel and set aside.
Figure 12.6 Turn off Gas Valve
•Turn the gas ball valve off and disconnect the gas line after the ball valve by loosening the fl are nut using a 13/16 in. and a 15/16 in. wrench.
23 |
