Xerox 50 Entering and Exiting Tools Mode, Entering Tools Mode, Key Point, Administration symbol

Entering and Exiting Tools Mode

Entering Tools Mode

KEY POINT:

•All previous programming selections are canceled when you press the Clear All button in the Tools Mode.

•You cannot program jobs while in the Tools Mode.

1

2

3

1	Press the Administration button (Figure 2) above
	the numeric keypad to display the Access screen,
	illustrated in Figure 3.

Figure 2: Administration symbol

4

Figure 3: Access screen

5

2	Touch the Tools button to display the Tools
	Access Number screen, as illustrated in Figure 4.

Figure 4: Tools Access Number screen

6

7

DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 3–3 TOOLS MODE