Xerox 50 manual Basic procedure for setting Feature Defaults, 2 3 4 5 6 7, Feature Defaults screen

Basic procedure for setting Feature Defaults

1

1	On the Tools screen, touch the Feature Defaults
	button to display the Feature Defaults screen, as
	illustrated in Figure 14.
2	Review feature default items and their current
	settings.
	Figure 14: Feature Defaults screen
	KEY POINT: There are multiple screens or
	pages for Feature Defaults. The numbers in the
	box at the top right of the screen indicate which
	Feature Defaults screen you are viewing and the
	total number of screens. For example, 1/4
	indicates you are viewing the first of four Feature
	Defaults screens.
	To display items on other screens, touch the Next
	Page button or Previous Page button or use the
	arrow keys to scroll to the location.
3	To change the current setting of a feature, use the
	up and down arrows to highlight the desired
	feature.
	Touch the Change Settings button to display the
	feature detail screen.
4	Touch the button for the desired default.
5	Touch Save to display the Feature Defaults
	screen.
6	If necessary, select another feature and change its
	settings using steps 2-5. Refer to the sections that
	follow for more information about individual
	features.
7	Touch Close to display the Tools screen.

2

3

4

5

6

7

DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 3–11 TOOLS MODE