Figure 37: Aligning the new Cleaning Web
4–22
MAINTENANCE
Close the Front Door of the copier/printer.
12
7 Remove the new Cleaning Web from the box.
8 Align the front and rear arrows of the new Cleaning Web with the front and rear arrows on the right side of the fuser, as illustrated in Figure 37.
9 Rest the Cleaning Web on the black brackets and gently push the top of the new Cleaning Web into place, as illustrated in Figure 38. The Cleaning Web is in position when it stops. Press firmly to ensure that it latches.
CAUTION:Do not force the new Cleaning Web into the fuser, or you may damage the Cleaning Web.
10 Grasp the Paper Path Module and push the module into the copier/printer.
11 Rotate the Paper Path Module handle counterclockwise, to the up position, until it is in a locked position.

1

2

4

5

6

7

Figure 37: Aligning the new Cleaning Web

Figure 38: Replacing the new Cleaning Web

DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE

Page 122
Image 122
Xerox 50 manual 1 2 4 5 6 7, Aligning the new Cleaning Web, Replacing the new Cleaning Web