Xerox 50 manual 1 22, 4 5 6 7, Confirm password window, Close button, 11111

1

22

2	Enter a new password in the New password box,
	Figure 48, by using the numeric keypad. Asterisks
	display instead of the numbers shown in the
3	example.
	Press the Enter button.
4	Enter the same number in the Confirm password	Figure 48: Confirm password window
	box, Figure 48. Again, asterisks display.

5	Press the Enter button.
	NOTE: If you make a mistake while entering a
	value, touch the Reset button, type the number
	again, and touch the Enter button.

4

5

6

7

6	Touch Close to save the new Auditron
	Administrator password, Figure 49.
	NOTE: Be sure to write down the new Auditron
	Administrator password and leave it in a secured
	area.
	Figure 49: Close button
	KEY POINT: You cannot enter the Auditron
	Administration mode without your password. If
	you lose or forget your Auditron Administrator
	password, contact your Xerox representative.
	The Xerox representative will clear the existing
	password by returning it to its factory default of
	11111.
	The Auditron Administration screen is displayed,
	Figure 50.

7	Touch the Close button to display the Access	Figure 50: Auditron Administration screen
	screen.

8	Touch Close in order to exit and return to the
	basic programming screens.

METERS, CONSUMABLES, AND AUDITRON 2–30 DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE