Xerox 50 manual Machine Set-up, 1 2 3 4 5 6 7, Machine Setup screen, Copy Quantity Limit screen

1

2

3

4

5

6

7

Machine Set-up

Use these settings to limit the number of copy sets, disable/enable the Power Saver mode option, select desired display units, and enter network information.

1	On the Tools screen, touch the Machine Set-up
	button to display the Machine Set-up screen, as
2	illustrated in Figure 38.
	Review the current settings for each item. To
	change a setting, use the up and down arrows to
	highlight the desired item and touch the Change
3	Settings button to display the detail screen.
	Perform one of the following:
	• On the Copy Quantity Limit screen (Figure
	39), use the numeric keypad to enter the
	maximum number (1—999) of copies/sets
	allowed.

•On the Power Saver Default screen (Figure 40), touch either the Enabled or Disabled button.

NOTE: If the Power Saver Default option is disabled, the Power Save Timeout in Machine Timouts will not be selectable.

Figure 38: Machine Setup screen

Figure 39: Copy Quantity Limit screen

Figure 40: Power Saver Default screen

TOOLS MODE 3–26 DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE