Xerox 50 manual 1 2 4 5 6 7, Rotating and securing the Cartridge

Models: 50

1 138
Download 138 pages 36 Kb
Page 108
Image 108
Figure 11: Rotating and securing

1

2

4

5

6

7

7

Align the arrow on the cartridge with the raised

 

 

arrow at the top of the opening, and slide the

 

cartridge into the copier/printer, as illustrated in

 

Figure 10.

8

Rotate the cartridge clockwise until the arrow on

 

 

the cartridge is aligned with the closed padlock on

 

the copier/printer and the arrows on the cartridge

9

are horizontal, as illustrated in Figure 11.

Close the Front Door of the copier/printer.

 

10

Remove the sheets of paper on the floor under the

 

 

Dry Ink Cartridge, and dispose of the sheets

 

according to local regulations.

 

CAUTION:Do not use warm or hot water, or

 

cleaning solvents, to remove dry ink from your

 

skin or clothing. This will set the dry ink and make

 

it difficult to remove. If any dry ink gets on your

 

skin or clothing, use a brush to remove the dry ink,

 

blow it off, or wash it off with cold water and mild

 

soap.

 

CAUTION:If more than one Dry Ink Cartridge

 

needs to be replaced at the same time, be careful

 

to place the new cartridges in their correct color

 

locations.

Figure 10: Aligning the Cartridge arrow and sliding the Cartridge into the copier/printer

Figure 11: Rotating and securing

the Cartridge

MAINTENANCE

4–8

DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE

Page 108
Image 108
Xerox 50 manual 1 2 4 5 6 7, Rotating and securing the Cartridge