Replacing the Fuser Oil Cartridge

Replacing the Fuser Oil Cartridge

 

When a message is displayed to replace the

 

1

 

 

 

 

Fuser Oil, follow the instructions provided on this

 

 

 

page in addition to those on the labels

 

 

 

surrounding the Fuser Oil area (Figure 25) and

 

 

 

affixed to the copier/printer.

 

 

 

WARNING: The fuser can be very hot. To avoid

 

 

 

personal injury, do not touch any component other

Figure 25: Check the Fuser Oil message

2

 

than those indicated in the following procedure.

 

CAUTION:Fuser oil can be slippery. If any fuser

 

 

 

oil is spilled on the floor, thoroughly clean the

 

 

 

area.

 

 

 

WARNING: Do not place the fuser oil cartridge on

 

 

 

the copier/printer. If any fuser oil is spilled on the

 

 

 

copier/printer, thoroughly clean it.

 

 

 

WARNING: Fuser oil may cause irritation to your

 

 

 

eyes. Thoroughly wash your hands with soap and

 

 

 

water after handling the fuser oil cartridge.

 

 

 

 

 

 

 

 

 

44

 

 

 

1

Open the Front Door of the copier/printer.

 

 

 

 

 

 

 

2

Place a few sheets of paper on the floor to catch

 

 

 

 

 

3

any fuser oil that may spill.

 

 

Rotate the green handle clockwise, to the down

 

5

 

 

 

position.

6

7

DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 4–15

MAINTENANCE

Page 115
Image 115
Xerox 50 manual Replacing the Fuser Oil Cartridge, Check the Fuser Oil message