Figure 26: Pulling out the Paper Path Module

1

2

4

Grasp the Paper Path Module and firmly pull the

 

 

module out of the copier/printer until it is fully

 

open, as illustrated in Figure 26.

Figure 26: Pulling out the Paper Path Module

4

5

6

7

5

Locate the Fuser Oil Cartridge in the front of the

 

6

Paper Path Module (area D).

Lift the Fuser Oil Cartridge straight up off the

 

 

module, as illustrated in Figure 27. Hold it steady

 

in this position until any excess oil has dripped off

 

the cartridge and into the fuser oil reservoir. Hold a

 

sheet of paper under the bottle nozzle to catch

 

any drips while removing the cartridge from the

 

machine.

D

Figure 27: Removing the old

Fuser Oil Cartridge (D)

MAINTENANCE

4–16

DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE

Page 116
Image 116
Xerox 50 manual 4 5 6 7, Pulling out the Paper Path Module, D : Removing the old, Fuser Oil Cartridge D