Figure 20: Removing the cap

4

Grasp the Developer Waste Container with your

 

 

right hand. Pull the Developer Waste Container

 

completely out of the copier/printer, as illustrated

 

in Figure 19.

1

2

5

Remove the gold cap from the front of the used

 

 

Developer Waste Container, as illustrated in

 

Figure 20.

6

Securely push the gold cap over the opening on

 

 

the back of the waste container, as illustrated in

 

Figure 21, to prevent developer beads from

 

spilling out.

Figure 19: Removing the old Developer Waste Container

Figure 20: Removing the cap

Figure 21: Placing the cap on

the waste container

44

5

6

7

DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 4–13

MAINTENANCE

Page 113
Image 113
Xerox 50 manual 44 5 6 7, Removing the cap, Placing the cap on the waste container