Touch Enable Auto Paper or Disable Auto

1

2

3

4

5

6

7

3

Review the current settings for each tray and the

 

4

Auto Tray Switching option.

To enable or disable Auto Tray Switching, use the

 

 

up and down arrows to highlight the desired paper

 

tray, and touch the Change Settings button to

 

display the tray detail screen, as illustrated in

 

Figure 11.

 

Touch Enable Auto Paper or Disable Auto

5

Paper.

Touch Save to display the Auto Tray Setup

 

 

screen.

 

If necessary, repeat steps 3 through 5 for another

6

paper tray.

To enable or disable Auto Tray switching, use the

 

 

up and down arrows to highlight the Auto Tray

 

Switching option. Touch the Change Settings

 

button to display the Auto Tray Switching screen,

 

as illustrated in Figure 12.

 

Touch Switching Enabled, Switch-Auto Paper

 

Only, or Switching Disabled.

 

Switching Enabled enables switching for all

 

paper trays even if you manually select an

 

output tray.

 

Switch-Auto Paper Only enables switching

 

when Auto Paper is selected on the Basic

 

Copying Tab.

 

Switching Disabled disables tray switching

7

altogether.

Touch Save to return to the Auto Tray Setup

 

8

screen.

Touch Close to display the Tray Management

 

9

screen.

Touch Close to display the Tools screen.

 

Figure 11: Sample Tray detail screen

Figure 12: Auto Tray Switching screen

TOOLS MODE

3–8

DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE

Page 62
Image 62
Xerox 50 manual 1 2 3 4 5 6 7, Touch Enable Auto Paper or Disable Auto, Touch Switching Enabled, Switch-AutoPaper