Product Dimensions
17 5/16" |
(44.0 cm) |
18 1/16"
(45.9 cm)
57/16" (13.8 cm)
Minimum of 3" (7.6 cm)
For Cartridge Change
How to Use the Inlet/Outlet Fitting Retention Clips
This product is outfitted with inlet/outlet fittings. The fittings can be attached or removed from the system
without tools. Retention clips are
1.Insert fitting into manifold.
2.With fitting inserted into manifold port, snap clip into place beginning at the bottom window
3.Push center tab into center window.
4.Finally push top tab into top window.
Step 1 | Step 2 | Step 3 | Step 4 |
4