3M AP-DWS1000 LF operating instructions Important Notes

Page 4

CAUTION

To reduce the risk associated with property damage due to water leakage:

•Read and follow the Instructions in this manual before installation and use of this system.

•Installation and Operation of this system MUST comply with all state and local plumb- ing codes.

•Protect from freezing. Drain filter when temperatures drop below 40°F (4.4°C).

•Do not install if water pressure exceeds 125 psi (862 kPa). If your water pressure exceeds 125 psi, you must install a pressure limiting valve. Contact a plumbing professional if you are uncertain how to check your water pressure.

•Do not install where water hammer conditions may occur. If water hammer conditions exist you must install a water hammer arrester. Contact a plumbing professional if you are uncertain how to check for this condition.

•Install on COLD water lines only, maximum temperature is 100°F (37.8°C).

•The disposable filter cartridge must be replaced every six months or at the speci- fied service cycle.

•Do not use a torch or other high temperature sources near filter or plastic fittings.

•Do not install in direct sunlight.

•Do not install near water pipes which will be in path of a drilling tool when selecting the position to mount the bracket.

•Mount filter in such a position as to prevent it from being struck by other items used in the area of installation (waste baskets, etc).

•On plastic fittings, never use pipe sealant or pipe dope. Use thread sealing tape only.

•Ensure all tubing and fittings are secure and free of leaks.

•Do not install unit if collet is missing. Contact CUNO if collets are missing from any fittings.

•SHUT OFF FUEL SUPPLY TO WATER HEATER after water is shut off.

•Shut off cold water valve under the sink before installing feedwater valve.

•Shut off inlet water supply and depressurize system as shown in manual when changing cartridges or servicing.

•Install with the inlet and outlet ports as labeled. Make sure not to reverse connections.

IMPORTANT NOTES

•Failure to follow instructions may void warranty.

•Allow a minimum of 2” (5 cm) clear space under filter to facilitate cartridge change.

•Do not crimp copper tubing.

•Porcelain, enamel and ceramic sinks require special procedures for drilling holes. Refer to the special section on porcelain, enamel and ceramic sinks for detailed instructions.

•Some state and local plumbing codes may prohibit the use of saddle-type valves and/or drain connections. The use of saddle-type valves are prohibited in: Alaska,

Delaware, Idaho, Kentucky, Massachusetts, Michigan, Minnesota, New Hampshire, North Dakota, Ohio, Oregan and South Dakota. Check your local plumbing codes for any restrictions that apply.

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Installation and Operating Instructions For Page Intended use To reduce the risk associated with chokingImportant Notes Specifications IntroductionParts Included Model AP-DWS1000 Drinking Water System Tools Required not includedInstall Drinking Water System Faucet Refer to , Install Feedwater Valve Refer to ,Installing the Faucet Mount SystemTest System Making Connections Refer to ,Flush Filter Troubleshooting ProcedureWater leaks from threaded connection Water leaks at quick connect fittingsQuick Connect Guide Figure To Release TubingAP-DWS1000 Parts List Figure Reference # DescriptionInstallation Overview Figure Standard Installation OverviewInstall Drinking Water System Faucet Figure Install Feedwater Valve FigureMaking Connections Figure Page Page Limited One Year Warranty

AP-DWS1000 LF, AP-DWS1000 specifications

The 3M AP-DWS1000 and AP-DWS1000 LF are advanced water filtration systems designed for commercial applications, specifically targeting the growing need for high-quality drinking water in workplaces and public facilities. These systems integrate cutting-edge technology to ensure clean, safe, and great-tasting water.

One of the main features of the 3M AP-DWS1000 is its multi-stage filtration process. This sophisticated method begins with the removal of sediment and larger particulate matter, which can affect the clarity and aesthetic qualities of the water. Following this, the system employs activated carbon filtration to effectively reduce chlorine, taste, and odor, ensuring that the water is not only safe but also pleasant to drink. The AP-DWS1000 LF variant is particularly suited for applications requiring lower levels of lead reduction, making it ideal for settings where water quality is suspect.

Both models utilize a unique design that promotes an easy installation process. The compact nature of the unit also allows for flexible placement options without compromising space. Additionally, the systems come with a user-friendly interface that includes a monitoring feature, which alerts users when filter replacements are necessary. This ensures that the filtration process remains effective, and compliance with health standards is maintained.

In terms of technology, both the AP-DWS1000 and AP-DWS1000 LF leverage advanced materials that enhance their performance and longevity. The high-capacity filters are designed to last longer than traditional filters, making them a cost-effective solution for businesses concerned with maintenance and operational disruptions.

Another characteristic that sets these systems apart is their capacity for high flow rates. This feature allows for multiple users to access filtered water simultaneously without a noticeable drop in water pressure, making them ideal for high-traffic areas.

The 3M AP-DWS1000 and AP-DWS1000 LF represent a fusion of efficiency, effectiveness, and convenience, catering to the needs of modern establishments. With their innovative filtration technologies and user-friendly designs, they provide reliable water quality that aligns with today's health and safety standards. Businesses looking to enhance their water quality solutions can confidently consider these systems as a significant upgrade over traditional filtration methods.
Top Page Image Contents