Motorola T605 manual Installing the Power Adapter Cable

English

Installing the Power Adapter Cable

Caution: Failure to follow these steps may cause the accessory not to work properly and could cause damage to the car kit.

Note: A vehicle adapter harness may be available from a third-party vendor that allows integration of the T605 handsfree audio into the vehicle entertainment system. The power adapter cable is designed to be connected directly to such an adapter harness using the 8-pin white connector, while the 6-pin black connector (for power and line-level audio) and 2-pin black connector (for speaker-level audio) are connected to the ECU. If you choose to use a third-party vehicle adapter harness (not supplied), follow the third-party vendor’s guidelines for proper installation.

For installation into a vehicle without the use of a third-party adapter harness:

External Speaker

Microphone

User Interface Module (UIM)

L/R In

(Aux Device)

Audio Adapter Cable L Out and R Out (Audio)

Electronic Control Module (ECU)

Power Adapter Cable

Purple and Gray: Speaker-Level Handsfree Audio (not used in this configuration)

Red: Fuse Box (Power)

Green: Fuse Box (Ignition)

Black: Vehicle

Chassis (Ground)

Orange: Line Level Handsfree Audio (+)

Blue: Line Level Handsfree Audio (-)

Yellow: Mute

Vehicle Entertainment System

4