INSTALLATION
Be cautious!
Water filtration device installation place 1
Please install the water filtration system not at a rough place, a damp place, a place where the unit is exposed to the direct sunlight, a place where dust is present, or a place that the water drops.
Water filtration device installation place 2
Please install at the place where it is 10 cm or more off from the wall and the bottom is flat and firm.
1O Cm
After installing the water filtration system
Please empty the water tank filled with filtered water two times after the product installation.
Cold water plumbing
Please connect the source water. Make sure that the source water is not from hot water line. If you use hot water as source water, then it will cause permanent damages to RO membrane and severely degrade the product performance.
Hot water Pipe
|
| To maintain optimal product performance, consult a Coway engineer for the detailed |
| Tips | installation methods. |
| There may be some water remaining inside of the filter which was used to test the | |
|
| |
|
| product during inspection process at the factory. |
|
| Please feel at easy and use as it isn’t the used product. |
|
| Don’t reuse the main water supply valve and hose that was previously |
11 |
| used when you |
|
|