Harman-Kardon AVR 254 owner manual AVR Power On and Source Selectors

INSTALLATION

Figure 42 – AVR Power On and Source Selectors

NOTES:

•Any time you press one of the Source Selectors on the remote (i.e., Cable/Sat, DVD, Media Server, Radio, TV, Game or AUX), the remote will switch modes to transmit the codes programmed to operate that device. To control the receiver, press the AVR Settings Button to return the remote to AVR mode. Some AVR functions are available in all device modes, and you don’t have to press the AVR Settings Button first to use them: Volume Controls (including Mute), Audio Effects, Video Modes, Surround Modes, AVR Settings, Info Settings, Sleep Settings and AVR Power On and Off.

•If you are not using the AVR’s HDMI Output with your display, you may not see a picture the first time you turn on the AVR 254, or after a system reset. To correct this, press the front-panel Resolution Button to display the current video output resolution. Use the ⁄ Button to change it to 480i, which should be com- patible with all video displays, then press the OK Button to select the new setting. You will be prompted to accept or can- cel the change; the CANCEL message will appear on the front panel. Press the ¤ Button to view the ACCEPT option, and then press the OK Button to complete the change to the output resolution. Follow the directions in the Initial Setup section to configure the AVR to function correctly with your display and other components.

32