Brookstone WIRELESS BLUETOOTH SPEAKER instruction

Big Blue Go™

WIRELESS BLUETOOTH® SPEAKER

LI-ION BATTERY WARNINGS

This device contains a Lithium-ion battery. The battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling

or disposal.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the distance between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.This equipment may not cause harmful interference.

2.This equipment must accept any interference received, including interference that may cause undesired operation.

Modifications not authorized by the manufacturer may void the user’s authority to operate this device. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

RSS INFORMATION

This device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Cet appareil est conforme à la norme RSS-210 de la règlementation d'Industrie Canada ; son utilisation est soumise aux deux conditions suivantes :

(1)l'appareil ne doit pas produire de brouillage, et

(2)l'utilisateur de l'appareil

doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

The device meets the exemption from the routine evaluation limits in section

2.5of RSS 102 and compliance with RSS-102 RF exposure. Users can obtain Canadian information on RF exposure and compliance.

Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition

de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

LOCATION OF PARTS

AND CONTROLS

1.Charging LED Indicator (behind speaker grill)

2.LED Ring

3.Pairing/Play/Pause Button

4.Micro USB Charging Port

5.Power/Battery Level Switch

6.Volume Up Button

7.Volume Down Button

8.Call Answer/Track Forward Button

9.Call End or Ignore/Track Back Button

10.Vehicle Suction Mount

11.12V/24V Car Adapter

12.AC/DC Adapter

13.USB to Micro USB Charging Cable

LOCATION OF PARTS

AND CONTROLS

11 13

CHARGING THE SPEAKER

1.Insert the included USB cable's MICRO USB connection into the

MICRO USB CHARGING PORT on the speaker.

2.The speaker can be charged several ways:

•Plug the USB cable's USB connection into the included AC/DC power adapter. Plug the AC/DC power adapter into an electrical wall outlet.

•Plug the USB cable's USB connection into the included 12V/24V CAR ADAPTER and plug the 12V/24V CAR ADAPTER into your vehicle's DC socket.

•Plug the USB cable's USB connection into your computer’s USB port.

3.The CHARGING LED INDICATOR is RED while the speaker is charging. When the speaker is fully charged, the CHARGING LED INDICATOR is GREEN. For first time use, charge the speaker for at least 3 hours.

4.When speaker's battery is low, the CHARGING LED INDICATOR will flash RED.

BLUETOOTH® DEVICES

The speaker pairs with devices that use the Bluetooth® Hands Free Profile (HFP) and/or the Advanced Audio Distribution Profile (A2DP). HFP enables hands-free communication and the A2DP dictates how audio is streamed from one device to another over

a Bluetooth® connection. When you pair devices to the speaker, the devices operate according to their protocols. For example, when you pair a smartphone to the speaker, it handles calls and plays music since it has both the HFP and A2DP protocols. MP3 players with Bluetooth® and A2DP only play music and cell phones (not smartphones) only handle calls.

PAIRING YOUR DEVICE

1.Prepare your device to pair using Bluetooth® wireless technology, making sure you are within 33 feet of the speaker. Refer to your device’s owner's manual for details if necessary.

2.Slide the POWER SWITCH to • to turn the speaker on. A tone will sound and the LED RING will illuminate solid blue for 5 seconds.

Note: When the LED RING is off and any button is pressed, the LED RING

Merrimack, New Hampshire, USA 03054 800-846-3000 • Brookstone.com

840066

WIRELESS BLUETOOTH SPEAKER specifications

The Brookstone Wireless Bluetooth Speaker is a versatile audio device designed to enhance your listening experience with portability and superior sound quality. Known for its sleek design and modern aesthetics, this speaker fits seamlessly into any setting, whether at home, in the office, or on the go. It is an ideal choice for audiophiles seeking rich, clear sound without the hassle of wires.

One of the main features of the Brookstone Bluetooth Speaker is its advanced Bluetooth connectivity, allowing users to connect effortlessly to a wide range of devices, including smartphones, tablets, and laptops. With a wireless range of up to 33 feet, you can enjoy your music from a distance without compromising connection quality. The quick pairing feature simplifies the setup process, enabling users to start their audio experience in seconds.

The speaker boasts high-fidelity sound, delivering deep bass and clear treble. It leverages innovative audio technology to produce robust sound quality, making it suitable for various genres, from classical music to modern pop. The built-in equalizer settings allow users to customize their listening experience by adjusting the sound profile to their specific preferences.

Portability is another significant characteristic of the Brookstone Bluetooth Speaker. It is lightweight and compact, making it easy to carry around. The durable construction ensures it can withstand everyday wear and tear, making it an excellent companion for outdoor activities. Whether you’re at a beach party or hiking trip, this speaker can deliver impressive sound in any environment.

Additionally, the Brookstone speaker features a long-lasting battery life, providing up to 10 hours of continuous playback on a single charge. This ensures that you can enjoy your favorite tunes without interruption throughout the day. The integrated microphone facilitates hands-free calling, allowing users to take calls without needing to disconnect from their music.

The Brookstone Wireless Bluetooth Speaker also supports various audio formats, making it versatile for different media types, including streaming services and podcasts. The speaker’s user-friendly controls allow for easy management of tracks and volume levels.

In summary, the Brookstone Wireless Bluetooth Speaker is a remarkable blend of style, sound quality, and functionality. Its innovative technology, combined with a focus on portability and user convenience, makes it an ideal choice for anyone looking to elevate their audio experience.