Hans Grohe 27164001 installation instructions Scale removal

Page 9

Scale removal

The showerhead and the handshower use the Quick Clean™ cleaning system. If scale deposits are noticed in the spray channels, turn the water on lightly and rub across the channels with a finger or a sponge to dislodge them.

To remove scale deposits from the showerhead spray face, pour about 3/4” of a commercial scale remover*, such as Lime-Away™ or CLR™, into a shallow dish.

Soak the spray face for the amount of time shown in the label instructions.

Rinse the showerhead with clear water.

Install the showerhead. Flush it with clear water for at least one minute.

Image 9
Contents Raindance Connect Showerpipe Installation Instructions / WarrantyRaindance Connect Showerpipe Suggested installationInstallation Considerations Technical InformationRecommended tools not included Drill the screw holes with a 6 mm bit Install the anchors InstallationPage Install the showerhead on the shower arm Adjust the slider User instructions Scale removal Replacement Parts Limited Lifetime Consumer Warranty Cleaning Recommendation for Hansgrohe ProductsThis Warranty does not COVER, and Hansgrohe will not PAY for