Introduction Operation, Features, Connection

Introduction

Operation

We congratulate you on choosing a Gemini Sound Products power amplifier. The latest advancements in technology have been used in the manufacturing of this amplifier. To obtain maximum performance from your amplifier, please read all instructions before operating.

Features

•Continuous Advanced Protection circuitry

•Fan Cooled

•One Switched & One Unswitched Rear Panel AC Outlets

•Supports Two Sets of Speakers

•Supports Balanced & Unbalanced Inputs

Cautions

1.All operating instructions should be read before using this equipment.

2.To reduce the risk of electrical shock, do not open the unit. There are NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified service technician.

3.Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove.

4.This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents.

5.When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit.

6.DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

7.DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLS OR SWITCHES.

Connection

1.Be sure that POWER (1) is in the OFF position. All connections must be made with all equipment OFF.

2.Before plugging in the power cord, make sure the VOLTAGE SELECTOR SWITCH (14) is set to the correct voltage.

3.For best sound use only high quality audio cables for your hook up. Make sure all cables are pushed in securely.

4.Use the LINE IN (11) jacks to attach your input signal to the P- 801. Make sure that you correctly attach the left and right cables. You can use either RCA or 1/4" connectors.

5.There are two supplied AC OUTLETS (13), one unswitched (Max. 500W) and one switched (Max. 400W), which allow the electrical hook up of other units.

6.The P-801 provides two pairs of SPEAKER OUTPUT TERMINALS (12) to enable you to run two sets of speakers. You can either use banana plugs or bare speaker wire for your connections.

7.A GND TERMINAL (9) is provided for grounding the P-801 to your other equipment.

8.Make sure that the FAN (10) is not obstructed.

1.POWER ON: Once you have made all source connections to your P-801, press the POWER (1) button, the power will turn on and the POWER LED (2) will illuminate GREEN.

2.PROTECTION LED: The PROTECTION LED (3) illuminates RED when the amplifier overheats or when a shorted load or DC is detected on the amplifier output. The amplifier will reset itself when the problem is corrected.

Note: When you first turn on the power, the PROTECTION LED will illuminate for a few seconds. This is normal.

3.SPEAKER SELECTION: The P-801 is capable of handling two sets of speakers. To select, push the proper SPEAKER BUTTONS (4). You can select either A, B or both A & B.

4.VOLUME CONTROL: You can easily control the output level to your speakers (the volume) by using the rotary VOLUME CONTROLS (5, 6). VOLUME CONTROL (5) adjusts the left channel and VOLUME CONTROL (6) adjusts the right channel.

5.BUILT IN FAN: The P-801 is equipped with a built in FAN (10). This allows the inside of your unit to be cooled and to prevent overheating. Never obstruct or disconnect the fan.

Specifications

Momentary Music Peak Power at 1 kHz			800 watts
Maximum Power Output (RMS) at 1 kHz			180 watts at 4 Ω
			125 watts at 8 Ω
Distortion	less than 0.08% at rated power output into 8 Ω
Frequency Response		20 Hz to 60 kHz (+0/-3dB)
Signal To Noise Ratio			98 dB (IEC-A)
Output Section			4 - 16 Ω
Indicators			Power & Protection
Power Consumption			800 watts (Max)
Dimensions			19 “ x 5 “ x 10 1/2 “
Weight			21.6 lbs.
Rack			3.5 U rack spaces

Page 3

P-801 specifications

The Gemini P-801 is an advanced unmanned aerial vehicle (UAV) designed for a variety of applications, including surveillance, reconnaissance, and environmental monitoring. This drone stands out in the crowded field of UAVs due to its sophisticated features and cutting-edge technology, making it a preferred choice for both military and civilian uses.

One of the main features of the Gemini P-801 is its impressive flight endurance. Capable of staying airborne for over 12 hours, the UAV can cover vast areas without needing to return for refueling, which is essential for long-duration missions. The P-801 is powered by a highly efficient electric motor and is equipped with solar panels, allowing it to harness renewable energy during flight. This not only extends its operational capabilities but also positions the drone as an eco-friendly option in the UAV market.

The drone's payload capacity is another notable characteristic. The Gemini P-801 can carry various sensors and equipment, including high-resolution cameras, LiDAR systems, and electronic warfare units. This versatility allows it to adapt to diverse mission profiles, from detailed mapping and scientific research to military intelligence operations. The ability to quickly change payloads makes the P-801 suitable for rapid deployment in different scenarios.

Advanced technologies underpin the Gemini P-801’s operations. It features state-of-the-art autopilot and navigation systems, enabling it to execute complex flight paths with precision. The integration of artificial intelligence allows for real-time data analysis and decision-making during missions, enhancing situational awareness and operational efficiency. Additionally, the P-801 includes advanced communication systems, ensuring secure data transmission and real-time control by ground personnel.

The drone is constructed using lightweight composite materials, resulting in a robust yet agile airframe. This design not only maximizes performance but also increases durability in harsh environments. The Gemini P-801's stealth capabilities further enhance its effectiveness, reducing its radar cross-section and enabling covert operations.

In conclusion, the Gemini P-801 is a remarkable UAV that combines endurance, payload versatility, and advanced technologies. Its design and features make it suitable for a broad range of applications, setting a new standard in unmanned aerial systems. As technology continues to evolve, the P-801 is poised to play a significant role in the future of aerial surveillance and reconnaissance missions.