Garmin GMA 240 installation manual Post Installation Checkout, Lamp Test, Failsafe Operation Check

Page 23

3.5Post Installation Checkout

CAUTION

Check wiring connections for errors before inserting the GMA 240 into the rack. Incorrect wiring could cause internal component damage.

An in-aircraft checkout may be performed in the aircraft on the ramp with known good microphone, headset, and avionics receivers.

3.5.1Lamp Test

1.Apply power to the unit by rotating the pilot intercom knob clockwise.

2.Verify that all annunciators on the front panel are illuminated during initial power up.

3.5.2Failsafe Operation Check

1.Turn the unit off by rotating the pilot intercom knob fully counter clockwise.

2.Check the failsafe operation by exercising the COM 1 microphone, microphone key, and monitoring received COM 1 audio over the pilot headphone’s left earpiece.

3.If installed, check that the failsafe warning is heard in the pilot headphone’s left earpiece.

4.Turn the unit back on to continue testing.

3.5.3Transceiver Operational Check

1.Perform a ramp test radio check by exercising the installed transceivers, microphone, microphone key, and audio over the headphone.

2.Verify that communications are loud and clear and PTT operation is correct.

3.5.4Intercom System (ICS) Check

NOTE

Stereo headsets are recommended if stereo jacks are installed. Alternatively, the installation should employ stereo jacks with a mono/stereo switch that disconnects the audio panel’s right channel output from the jack’s ring contact when in mono mode. If a monaural headset is used in a stereo jack, the audio panel’s right channel output is shorted to ground by the mono headset’s plug. This causes excess power supply current to be drawn. While this does not damage the unit’s output circuitry, prolonged periods (especially at high volume) may cause the internal power input fuse to open. This is because the unit is optimized for low-power operation in systems with limited power budgets. In the case of copilot/passenger positions wired in parallel, any stereo listener will lose right channel audio when another passenger plugs in a mono headset.

1. Set the intercom to the ALL mode [Pilot ISO LED off.]

GMA 240 Installation Manual

Page 3-3

190-00917-01

Rev. A

Page 22 Page 24
Image 23
Page 22 Page 24
Contents GMA Description Record of RevisionsSection Range Information Subject to Export Control LawsThis page intentionally left blank Table of Contents Appendix a Outline and Installation Drawings List of Illustrations GMA 240 Hardware MOD Level History Equipment Description IntroductionPhysical Characteristics Technical SpecificationsCharacteristic Specification Features SummaryElectrical Characteristics Part Number Document Power RequirementsReference Documents Limited Warranty Blank Equipment Available Installation MaterialsGMA 240 Wiring, Configuration, and Adjustment Options Garmin P/NInternal Configuration Jumpers Component Name Default DescriptionMusic VOLUME/MUTE Configuration AdjustmentsHardwire Configuration Option Access Hole Location Top ViewNoise GMA 340 Unit Rack GMA 240 MountingPositioner Unpacking UnitElectrical Connections Audio Shield Termination GMA 240 InstallationTransceiver Operational Check Post Installation CheckoutLamp Test Failsafe Operation CheckMusic System Check Aircraft Receivers CheckPin List Connector Description1 P2401 Connector J2401 Pin Assignments Pin Name 2 J2402 Connector J2402 Pin Assignments Pin Name Pin Connector Pin Name Aircraft Power and Lighting3 P2403 Connector front panel 2.5 mm mini-jack Aircraft PowerPin Connector Pin Name Description Configuration PinsExternal Configuration Pins Audio Inputs/Outputs and Mic Keys Intercom Key Inputs if configuredCOM Audio and Mic Keys Pin Connector Pin Name Description Pin Name Description Alert Audio I/O Pin Connector Pin Name DescriptionAUX and NAV Audio Inputs Pin Connector Pin Name Description Failsafe Warning Audio PinCOM Swap Pin Connector Pin Name Description Tel Audio I/O Pin Connector Pin Name DescriptionHeadset Outputs Pin Connector Pin Name Description Appendix a Outline and Installation Drawings Figure A-2. GMA 240 Connector/Rack Assembly Drawing Figure A-3. GMA 240 Recommended Panel Cutout Dimensions Appendix B Interconnect Drawings Figure B-1. GMA 240 Interconnect Drawing page 2 Figure B-1. GMA 240 Interconnect Drawing page 3 GMA240 J2401 Top of Main Board Bottom of Main Board

GMA 240 specifications

The Garmin GMA 240 is a state-of-the-art audio panel designed specifically for aviation applications. This device is known for its advanced features, user-friendly interface, and superior sound quality, making it a popular choice among pilots and aircraft owners. One of the standout characteristics of the GMA 240 is its ability to integrate seamlessly with a variety of communication and navigation systems, enhancing situational awareness and streamlining cockpit operations.

One of the main features of the GMA 240 is its capability to manage multiple audio inputs. The panel provides independent volume controls for the pilot and co-pilot, allowing each to adjust their audio levels according to their preferences. Additionally, the GMA 240 offers a dedicated input for auxiliary devices, such as smartphones or tablet computers, facilitating music playback or calls during flight.

The GMA 240 also incorporates advanced noise reduction technology. This feature minimizes ambient noise interference, ensuring that communication between the crew and air traffic control is crystal clear. The panel is equipped with a digital processing function that enhances audio clarity and reduces background noise, a critical asset in the typically noisy environment of an aircraft cockpit.

Another noteworthy characteristic of the GMA 240 is its intuitive operation. The layout of the controls is logical and straightforward, allowing pilots to adjust settings quickly and efficiently without distraction. This ease of use is crucial, especially during high-pressure situations when pilots need to maintain focus on flying while managing audio communications.

The GMA 240 supports a wide range of aircraft configurations, making it a versatile choice for various aviation needs. It is designed to be compatible with both general aviation and commercial aircraft, further extending its usability in different environments. The panel meets rigorous safety standards, ensuring it can withstand the demands of aviation use.

In terms of installation, the GMA 240 is engineered for easy integration into existing cockpits, requiring minimal modifications. Its compact design and robust build quality ensure durability even in challenging flight conditions.

In summary, the Garmin GMA 240 audio panel stands out for its combination of advanced features, user-friendly design, and high-quality performance. With its excellent noise reduction capabilities, independent audio controls for each crew member, and broad compatibility, it is an essential tool for enhancing communication and safety in the cockpit. This audio panel continues to be a preferred choice for aviation professionals seeking reliability and efficiency.
Top Page Image Contents