Axor 38053XX1 Technical Specification, Installation considerations, Installation Instructions

Page 2

Uno² widespread lavatory faucet 38053XX1

Technical Specification

Maximum water pressure

145 psi

Recommended water pressure

14.5 - 72 psi

Maximum hot water temp.

176o*

Recommended hot water temp

120o - 140o*

Max. flow rate @ 45 psi

2.2 gpm

Max. deck thickness

 

1

3/8”

Hole size in deck

valves

1

1/4”

spout

1 3/8”

 

 

*Many municipalities require that the water heater be set no

higher than 120o. Please know and follow all applicable plumbing codes when setting the temperature on the water heater.

Installation considerations:

This unit requires 1/2” supply lines and nuts, which are not included.

Installation Instructions

Push the valve up through the hole in

the mounting surface. Thread the mounting ring with o-ring on as far as it will go.

Pull downward on the valve until the mounting ring is seated firmly on the countertop. -Tighten the tensioning

screws.

2

Image 2
Contents Installation Instructions / Warranty Uno²Installation Instructions Technical SpecificationInstallation considerations Page Install the pop-up drain Service Parts WHO is Covered by the Warranty Cleaning Recommendation for Hansgrohe ProductsLimited Lifetime Consumer Warranty What is Covered by the WarrantyProduct Instructions and Questions Length of WarrantyTo Obtain Warranty Service