• Thread on the escutcheons with o- rings. Install the red and blue color rings. Install the white plastic handle snap connectors with the screws.- Press the handle firmly over the snap connector and push firmly downwards.
•Seat the spout assembly with sealing
ring on top of the mounting surface. From below, thread on the fiber washer, metal washer, and mounting nut.
•Make sure that the spout assembly stands straight. Tighten the
tensioning screws.
•Use the 3/8" compression fittings to install the connection hoses to the valve outlets.
• Connect the valves to the angle stops with ½” supply hoses and nuts. (Hansgrohe does not provide angle stops, supply hoses, or nuts.)
3