Cleaning Recommendation for Hansgrohe Products
Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality.
To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty.
Cleaning Materials for Faucets and Showers
·To remove lime scale, use only products made specifically for that purpose. Always follow the manufacturer’s instructions when using.
·Do not use cleaners that contain hydrochloric, formic, acetic, or phosphoric acids, as these will cause considerable damage to finishes and to plastic components.
·Never mix cleaning materials.
·Never use cleaners containing abrasives. Do not use abrasive cleaning cloths, pads, or sponges.
Cleaning Procedures
·Clean your faucets and shower products as and when required. Regular cleaning will prevent scale buildup and water spotting.
·Follow the label instructions. Do not allow any cleaner to remain on the product for longer than necessary.
·When using spray cleaners, spray first onto a sponge or cloth – do not spray directly onto the product.
·After cleaning, rinse thoroughly with clear water to remove any cleaner residue.
Important
·Soap and shampoo residue can also cause damage to the product. Rinse well with clean water after use.
·If the surface is already damaged, harsh cleaning materials will cause further damage.
Limescale Removal
The spray channels on the Raindance are protected by the Rubit!TM self- cleaning system. If scale deposits are noticed, turn the water on lightly, and rub across the channels with a sponge or fingers
Remove scale deposits on the spray face by using a commercial limescale remover such as