Harbor Freight Tools 94670 manual Electrical Safety, Personal Safety, Tool USE and Care, Service

Page 3

ELECTRICAL SAFETY

3.Grounded products must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If a grounded product should electrically malfunction or break down, grounding provides a low

resistance path to carry electricity away from the user.

4.Double insulated products are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified

electrician to install a polarized outlet. Do not change the plug in any way.

Double insulationeliminates the need for the three wire grounded power cord and grounded power supply system.

5.Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

6.Do not expose the Radio to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the Power Cord. Never use the Power Cord to carry the Radio or to pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock.

8.When operating the Radio outside, use an outdoor extension cord marked “W-A” or “W”. These extension cords are rated for outdoor use, and reduce the risk of electric

shock.

PERSONAL SAFETY

9.Stay alert. Watch what you are doing, and use common sense when operating the Radio. Do not operate the Radio while tired or under the influence of drugs, alcohol, or medication.

10.Store the Radio out of reach of children and other untrained persons. Electrical products are dangerous in the hands of untrained users.

TOOL USE AND CARE

11.Do not use the Radio if the Power Switch does not turn it on or off. Any appliance that cannot be controlled with the Power Switch is dangerous and must be replaced.

12.Disconnect the Power Cord before making any adjustments, changing batteries, or storing the Radio. Such preventive safety measures reduce the risk of turning on the

product accidentally.

SERVICE

13.Radio service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

SKU 94670

For technical questions please call 1-800-444-3353.

Page 3

Image 3
Contents Dynamo AM/FM Band Radio Work Area Technical SpecificationsGeneral Safety Rules Read and Understand ALL Instructions Model Serial No. Purchase DateTool USE and Care Electrical SafetyPersonal Safety ServiceDouble Insulated Appliances Appliances with TWO Prong Plugs GroundingGrounded Tools Tools with Three Prong Plugs See Figure aExtension Cords Figure BSymbology Assembly UnpackingOperation Using the Flashlight/Lamp Setting the Band Selector-AM/FM Turning the Radio On/OffUsing the Adaptor Parts List Description Maintenance and CleaningParts and Assembly Diagram Wiring Diagram