HOW TO USE
For Rear Cleansing
Rear cleansing
Sit on the seat and press the rear cleansing function selection button on the remote control.
-The cleansing water is ejected for about 1 minute and then automatically stopped.
-An automatic nozzle cleaning is performed for about 5 seconds after
cleansing when the nozzle retracts itself.
Adjust the nozzle position by pressing the nozzle position 
button.
Press the wide function selection button to adjust the desired water ejection range.
If the rear cleansing function selection button is pressed again while in cleansing operation, additional rear cleansing starts again for another 1 minute.
While in cleansing, users can adjust the water temperature, water pressure, and nozzle position according to their preference.
Move
Press the move function selection button on the control panel.
- The nozzle moves back and forth, providing a wider range of cleansing. It will be worked continuously while the cleansing function is operated.
You can adjust the nozzle position by pressing the nozzle position
button.
To stop the move function, press the move function selection button again.
Air dryer
Press the air dryer function selection button on the remote control.
-Warm air blows for about 2 minutes to dry the wet part.
If you wipe out the wet before turning on the air dryer function, you can finish drying faster.
You can adjust the air dryer temperature by pressing the water pressure/air
dryer
buttons.
If the air dryer function selection button is pressed again while in drying operation, additional drying starts again for another 2 minutes.
If the air dryer function selection button is pressed while in cleansing operation, the cleansing function is stopped and drying starts immediately.
Stop
If you want to stop the operation in use, press stop button. - It stops all operating functions.
The air dryer function is stopped in 2 seconds after the stop button is pressed.
16