Important! Do not clean the drum with acidic descaling agents, scouring agents containing chlorine or iron or steel wool.

1.Remove any rust deposits on the drum with a cleaning agent for stainless steel.

2.Run a washing cycle without any washing to clean off any cleaning agent residues.

Programme: Short Cotton Programme at maximum temperature and add approx. 1/4 measuring cup of detergent.

Door seal

Check from time to time the door seal and possible objects that could be trapped in the fold.

Warning! Before opening the pump door, switch the appliance off and remove the mains plug from the socket.

Proceed as follows:

1.Unplug the appliance.

2.If it is necessary, wait until the water has cooled down.

3.Open the pump door levering on the groove with a coin (or with the suitable tool, that you can find in the bag containing the instruction booklet depending on the model).

1

2

Cleaning the pump

The pump should be inspected regularly and particularly if:

the appliance does not empty and/or spin;

the appliance makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump.

a problem with water draining is detected (see chapter “What to do if...” for more details).

4.Place a container close to the pump to collect any spillage.

5.

6.Pull out the emergency emptying cap from the filter cover, using pliers.

24

Page 24
Image 24
John Lewis JLWM 1404 instruction manual Door seal, Cleaning the pump