If required, pour fabric softener into the compartment marked 
(the amount used must not exceed the «MAX» mark in the drawer). Close the drawer gently.
Select the required programme
Turn the programme dial to the required programme. The washing machine will automatically select the maximum spin value provided for the programme you have chosen and the display will show the duration, calculated on the basis of the maximum load for each type of fabric. Pressing the corresponding buttons to
change those values. The green pilot light of the button 8 starts flashing.
The dial can be turned either clockwise or counterclockwise. Turn to position «Off» to reset programme/Switching the machine off.
At the end of the programme the selector dial must be turned to position «Off» , to switch the machine off.
Caution! If you turn the programme selector dial to another programme when the machine is working, the red pilot light of button 8 will blink 3 times to indicate a wrong selection. The machine will not perform the new selected programme. The message Err is displayed for a few seconds. The machine will not perform the new selected programme.
Select the spin speed or None option
Press button 3 repeatedly to select the required spin speed or to select «None» option. If you select this option, all spinning phases are suppressed.
The relevant light will light up.
Select the desired options
Press buttons 4,5,6 and 7 to select the available options. Depending on the programme, different options can be selected together. These must be selected after choosing the desired programme and before pressing button 8.
13
