Grizzly G9298 owner manual Clean Up, Inventory Figure, Suffocation Hazard

Inventory Clean Up

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for shipping purposes.

Inventory: (Figure 2)		Qty
A.	Rotary Table	1
B.	Clamping Hardware:
	—Horizontal Clamp	1
	—T-Bolt M12-1.75 x 80	1
	—T-Bolts M12-1.75 x 60	2
	—Flat Washers 12mm	3
	—Hex Nuts M12-1.75	3
	A

B

Figure 2. Shipping inventory.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

SUFFOCATION HAZARD!

Immediately discard all plas- tic bags and packing materi- als to eliminate choking/suf- focation hazards for children and animals.

G9298/G9299/G9300 Rotary Table

The unpainted surfaces are coated with a waxy oil to prevent corrosion during shipment. Remove this protective coating with a solvent cleaner or degreaser, such as shown in Figure 3. For thor- ough cleaning, some parts must be removed.

For optimum performance, clean all moving parts or sliding contact surfaces. Avoid chlo- rine-based solvents, such as acetone or brake parts cleaner that may damage painted surfac- es. Always follow the manufacturer’s instructions when using any type of cleaning product.

Gasoline and petroleum products have low flash points and can explode or cause fire if used to clean machinery. DO NOT use these products to clean the machinery.

Many cleaning solvents are toxic if inhaled. Minimize your risk by only using these products in a well ventilated area.

G2544—Solvent Cleaner & Degreaser H9692—Orange Power Degreaser

Great products for removing shipping grease.

Figure 3. Cleaner/degreasers available from

Grizzly.

-7-