Grizzly G9298 H2939-4 Piece Edge Finder Set, G9296-Adjustable Tailstock, G9295-Dividing Plates

H2939—4 Piece Edge Finder Set

Four different styles to cover any setup problem! Set includes one each: a 3⁄8" diameter with a point, a combination 3⁄8" diameter with a point and

a0.200" shoulder, a 1⁄2" diameter with a 0.200" shoulder, and a combination 1⁄2" diameter with a 0.200" shoulder and a 0.500" shoulder.

Figure 16. H2939 4-Pc. Edge Finder Set.

G9296—Adjustable Tailstock

For 8" and 10" Rotary Tables

G9297—Adjustable Tailstock

For 12" Rotary Tables

When used with your rotary table and mill, these adjustable tailstocks provide the support you need for those longer workpieces. Clamps to your mill table with standard clamping hardware and allows precise and accurate adjustments.

Figure 17. Adjustable Tailstock.

-16-

G9295—Dividing Plates

When used with your rotary table, these dividing plates provide a higher degree of precision in hole placement, spot facing, and even gear making.

Figure 18. G9295 Dividing Plates.

H8370—Power Feed for Mills

If you want to get the most out of your mill, you really need a power feed. This power feed comes with everything required to start milling with exact control. Comes supplied with a mounting bracket, gear, auto-stop limit switch with moveable stop pins, gear guard, and motor. Specs: 0–140 RPM, 200 RPM rapid switch, 440 in/lb. maximum torque, 110V 60Hz motor, 4:1 bevel drive gear.

Figure 19. H8370 Power Feed.

G9298/G9299/G9300 Rotary Table