How to operate
Method A: Assign ouput X to play input Y
1.Press first 
then use 
or 
to select the output channel “X”.
2.Once you see the LED displays the desired output channel “X” then press 
and then use 
or 
to select the input channel “Y”.
3.Once you reach the desire input & output channel setting, wait for 2 seconds and it’ll be done.
Method B: Assign input X to be displayed on output Y
1.Press 
first then use 
or 
to select the input channel “X”.
2.Once you see the LED displays the desired input channel “X” then press 
and then use 
or 
to select the output channel “Y”.
3.Once you reach the desire input & output channel setting, wait for 2 seconds and it’ll be done.
Method C: Use hot keys to assign input X to be displayed on all 5 outputs
1.Press 
if you want to have input channel 1 to be shown on all 5 outputs.
2.Press 
you want to have input channel 1 to be shown on all 5 outputs.
3.Press 
you want to have input channel 1 to be shown on all 5 outputs.
4.Press 
you want to have input channel 1 to be shown on all 5 outputs.
5.Press 
you want to have input channel 1 to be shown on all 5 outputs.
Method D: Use hot keys to assign input X to be displayed on output X
1.Press 
then you can get the same default channel mapping in software control, as you can see the mapping table below.
Source Channel | Display Channel |
Input 1 | Output 1 |
Input 2 | Output 2 |
Input 3 | Output 3 |
Input 4 | Output 4 |
Input 5 | Output 5 |
Toll free: | 10 | www.atlona.com |
Local: |