1 TRIM INSTALLATION
Place ESCUTCHEON (1) onto ESCUTCHEON HOLDER (2).
Align ESCUTCHEON (1). Thread ESCUTCHEON HOLDER (2) onto DIRVERTER VALVE (3).
Tighten until ESCUTCHEON (1) is snug against fiished wall.
2
| 3 | |
| 1 | |
2 HANDLE INSTALLATION |
| |
Install KNOB MOUNT (1) onto VALVE STEM (2). | 1 | |
| ||
Thread HANDLE SCREW (3) into VALVE STEM (2) and tighten. | 3 | |
Align HANDLE (4) and push onto KNOB MOUNT (1). | ||
4 | ||
| ||
Tighten SET SCREW (5) in handle with |
| |
HEX WRENCH (6) SUPPLIED. |
|
2
5
6
3 OPERATING THE VALVE
Turn water supply on and test installed fitting.
Rotate handle to all diverter positions to check operation of valve.
Check for leaks.
OFF
M965032 REV. 1. 3