American Standard 2555.602 Install Handle, To Gain Access to Valve for Servicing

Page 3
M968789 Rev. 1.5

5 INSTALL HANDLE

 

 

 

 

Install HANDLE BUSHING (1) onto CAP (2).

 

7

 

 

Find correct position of HANDLE (3) and push HANDLE (3)

 

 

 

 

 

 

 

onto VALVE STEM (4).

 

 

 

 

Install HANDLE SCREW (5) and push in INDEX CAP (6).

 

 

 

 

Check proper operation of HANDLE.

6

5

 

 

 

 

 

Screw on DIVERTER KNOB (7).

 

 

 

2

 

 

1

4

 

3

 

 

 

6 TO GAIN ACCESS TO VALVE FOR SERVICING

Pull INDEX CAP, unscrew HANDLE SCREW and pull HANDLE off valve stem.

Remove two SCREWS holding ESCUTCHEON and remove ESCUTCHEON. Remove COVER by pulling straight out.

Shut off water supply by either closing off main water supply, or closing off the hot and cold CHECK STOPS on valve, if present.

VALVE LEAKS WHEN SHUT OFF

Remove CARTRIDGE (1) by removing CARTRIDGE SCREWS (2). Remove three SCREWS (3) from FIXATION RING (4) and pull out PRESSURE BALANCING (5) unit.

Clean SEALS (9) on base of CARTRIDGE (1). Check base of PRESSURE BALANCING UNIT (5) and clean O-RINGS (6). Remove CAPS (7) and check O-RINGS on inside of CAPS (7). Clean inside sealing surfaces of VALVE BODY (8).

Re-assemble PRESSURE BALANCING UNIT (5) and CARTRIDGE (1). Tighten all screws.

Turn on water supply and see above for installing TRIM and HANDLE.

UNABLE TO MAINTAIN CONSTANT TEMPERATURE

Remove PRESSURE BALANCE UNIT (5). Remove CAPS (7) and clean valve thoroughly.

Examine balancing unit and check condition of O-ring on end of piston. Piston should move back and forth. Order Repair Part M952100-0070Aif balancing unit is defective.

Replace CAPS (7) and install PRESSURE BALANCE UNIT (5). Make sure inlets line up with two holes in bottom of casting. Top flange should butt-up against top of casting.

BACK TO BACK INSTALLATION

Remove PRESSURE BALANCE UNIT (5). Rotate PRESSURE BALANCE UNIT (5) 180˚ so that the inlets face up and the large outlet port faces down.

Push PRESSURE BALANCE UNIT (5) in casting make sure inlets line up with holes in bottom of casting. Top flange should butt up against top of casting.

Reassemble FIXATION RING (4) and CARTRIDGE (1).

ROTATE 180˚

 

 

 

 

4

LARGE OUTLET

 

 

 

 

1

 

6

 

 

5

8

 

 

INLETS

 

7

5

3

2

 

 

 

9

BACK TO BACK INSTALLATION

7 CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

Page 2 Page 3
Image 3
Page 2 Page 3
Contents ROUGHING-IN ROUGHING-IN DimensionsInstall Trim Install DiverterUnable to Maintain Constant Temperature Install HandleTo Gain Access to Valve for Servicing Valve Leaks When Shut OFF
Related manuals
Manual 3 pages 53.27 Kb

2555.602 specifications

The American Standard 2555.602 is a prominent model within the brand’s line of bathroom fixtures, designed to blend both functionality and style. As a sophisticated toilet model, it is well-known for its exceptional performance, modern design, and innovative features that cater to the needs of homeowners and designers alike.

One of the standout characteristics of the American Standard 2555.602 is its efficient water usage. This toilet is equipped with a high-efficiency flush system that uses only 1.6 gallons per flush (GPF). This not only helps reduce water consumption, but also aligns with eco-friendly initiatives, making it an ideal choice for those looking to optimize their water usage without sacrificing performance.

In terms of design, the American Standard 2555.602 boasts a sleek, contemporary look that fits seamlessly into any modern bathroom decor. Its elongated bowl design provides added comfort for users, making it a popular choice among all age groups. The toilet also features a fast flush system that ensures waste is effectively removed with every use, minimizing the chances of clogs.

The model incorporates the latest technologies with its ceramic disc flush valve, which enhances durability and performance. This brass valve reserves water more efficiently and helps maintain consistent flushing power over time. Additionally, the toilet is designed with a fully glazed trapway, facilitating smooth waste passage and further reducing the likelihood of clogs.

American Standard is renowned for its commitment to quality, and the 2555.602 is no exception. Constructed from high-quality vitreous china, this toilet is not only aesthetically pleasing but also designed to withstand the rigors of daily use. Its standard height makes it accessible and comfortable for a wide range of users.

Installation is simplified with the inclusion of a straightforward mounting system and clear instructions, making it a favorite among DIY enthusiasts. Moreover, the 2555.602 is compliant with the standards set by the EPA WaterSense program, further emphasizing its eco-friendly credentials.

In summary, the American Standard 2555.602 combines innovative flushing technologies, stylish design, and user-friendly features, making it an exemplary choice for anyone looking to upgrade their bathroom. With its efficiency, comfort, and durability, it stands out as a reliable and eco-conscious option in the realm of modern sanitation solutions.
Top Page Image Contents