Web/SNMP Management SmartSlot Card User’s Guide 61
Events Menu
Management Card and Device Events
Overview The Management Card, UPS, and Environmental Monitoring SmartSlot
Card all generate event codes in response to specific conditions. Each
event has a unique code and is classified as having no severity level, or
with a default severity level that indicates the seriousness of the event.
Note: For information about severity levels and how they define the
actions associated with an event, see Event Actions (Web
Interface only) on page 53.
Management Card
events The following table identifies the Management Card events (labeled as
System events in the table’s descriptions).
Note: The Management Card has events that are classified as having
no severity level. You cannot configure any action to occur for
such events.
Continued on next page
Code Severity Description
0x0001 Severe System: Coldstart. (The Management Card was turned on.)
0x0002 Severe System: Warmstart. (The Management Card was reset
while it was turned on.)
0x0003 Warning System: SNMP configuration change.
0x0004 Informational System: Detected an unauthorized user attempting to
access the SNMP interface.
0x0005 Warning System: Detected an unauthorized user attempting to
access the Control Console interface.
0x0006 Warning System: Detected an unauthorized user attempting to
access the Web interface.
0x0008 Warning System: Password changed.
0x000C No severity System: File transfer started. (FTP)
0x000D No severity System: File transfer started. (TFTP)
0x000F No severity System: File transfer failed.
0x0014 No severit y System: Con trol Console User logged in.
0x0015 No severity System: Web User logged in.
0x0016 No severi ty System: FTP User logged in.
0x0018 No severity System: Reset to Defaults.
0x0019 No severity System: Initializing data.