Whirlpool ACS072XG, ACS102XG warranty Installing in a sliding window

Installing in a sliding window

NOTE: This air conditioner must be installed according to all applicable codes and ordinances.

1.Slide open or remove one sliding window sash from the window frame.

2. Attach support platform to sill plate		3/E”-long
with three 3/a”-long self-tapping
		self-tapping
screws.	7A 6”~long	screws

3.Thread locknut to about the middle of the leveling bolt.

4.Thread leveling bolt into support angle. The leveling bolt will be adjusted later.

5.Loosely attach the support angle to the bottom Of the SUDDOrt DkItfOrrt7 USinCl two 7/l 6”-long &&hi& screws, flat- washers, and nuts.

Self-tapping screw

6.Place the support platform assembly against the lower window track and

firmly against the vertical edge of the

.

window trame.

7.Attach the support platform assembly to the window stool using two self- tapping screws. Tighten screws securely.

8.Pull the support angle toward the outside of wall. Tighten 7/l6”-long machine screws on top of the support

platform.	/	I	platform
			assembly

I

Lower window track

continued on next page

8